[Jimmy252]

well firstly, to listen to an edacs, u need to dedicate a whole bank to it on the pro96.

-Lets say we use bank 0. Press program, function, trunk....and set bank 0 to EDACS.

- Then, u need to program the frequencies...***BUT*** do not program into channel "000".


(01) 866.71250 (02) 867.30000 (03) 867.78750 (04) 868.30000 (05) 868.82500

***Chronologically input the freqs....leave 000 blank, 001 you program the (01) freq that's above. 002 program the (02) freq that's above, 003 program the (03) freq that is above, and so on. So the only channels that should be programed are 001, 002, 003, 004, 005.

After that, you should be able to hit scan and it should work...