http://forums.radioreference.com/ A forum for the discussion of all Uniden scanning radios and receivers. en Sat, 21 Nov 2009 00:14:18 GMT vBulletin 60 http://forums.radioreference.com/images/misc/rss.jpg http://forums.radioreference.com/ http://forums.radioreference.com/uniden-scanners/164971-expected-life-led-lights-display-panel.html Fri, 20 Nov 2009 22:59:32 GMT Just out of curiosity does anyone know the expectant life of the display panel lights for a scanner like the Uniden BC796D? Are they readily replaceable? Just out of curiosity does anyone know the expectant life of the display panel lights for a scanner like the Uniden BC796D?
Are they readily replaceable? ]]> Uniden Scanners rfrf http://forums.radioreference.com/uniden-scanners/164971-expected-life-led-lights-display-panel.html http://forums.radioreference.com/uniden-scanners/164960-bc346xt-cupholder.html Fri, 20 Nov 2009 19:16:07 GMT Hi. If anyone is looking to get a cupholder mount for their 346XT, I found Belkin's TuneDok Cupholder for iPod works greats for this. You just need to remove the suction cup piece and the belt clip ring on the radio fits right into the cutout on the top of the cradle. It holds it nice and firmly into place. There some space left on the bottom of the cradle, but you don't need to fill the whole thing. The width is perfect and there is no issue connecting the power and accent the function/menu buttons on the side. Best of all I found it for just $3 on Amozon: Amazon.com: Belkin TuneDok Cupholder for iPod (White): Electronics ]]> Uniden Scanners crevatis http://forums.radioreference.com/uniden-scanners/164960-bc346xt-cupholder.html http://forums.radioreference.com/uniden-scanners/164951-listening-p25-channels.html Fri, 20 Nov 2009 17:00:43 GMT Since the P25 protocol is new in our area, I am now listening to it on my BCD-396XT for the first time. One thing I've noticed; When the P25 agency is transmitting, the 396XT seems to "check" the control channel during the transmission which causes a "break" in the transmission. I can see the P25 on the LCD display go on and off as the control channel is checked. Is there a way to stop this? One would think if the scanner is receiving traffic on the P25 channel, there wouldn't be a need to check the control channel until the P25 transmission stops.

And no, I do not have priority, Close Call, WX alert or any other function enabled that would cause the "break".

Also, why does it sound as if the audio is phase shifting on the P25 channels? Meaning the pitch goes up and down.

Thank you. ]]> Uniden Scanners PCTEK http://forums.radioreference.com/uniden-scanners/164951-listening-p25-channels.html http://forums.radioreference.com/uniden-scanners/164942-bcd396xt-audio-thru-ext-speaker.html Fri, 20 Nov 2009 15:30:39 GMT Is there something i'm missing? It seems when I run the audio thru an external speaker the output seems cut or less strong? Could this be a mono vs stereo issue as i have an extension line to speaker from the radio, but even when connected directly the audio is barely recognizable...

Are there any mods or possibly any firmware updates that will enhance audio output?

I sent back the remote head and the classic 396 for service...hopefully it will be back before too long.... ]]> Uniden Scanners LOf674 http://forums.radioreference.com/uniden-scanners/164942-bcd396xt-audio-thru-ext-speaker.html http://forums.radioreference.com/uniden-scanners/164928-bcd-996xt.html Fri, 20 Nov 2009 04:02:07 GMT I just purchased the 996xt & I am trying to turn the tone/code search "on". In the srch/clocall opt in the menu, I then select Tone/Code Search Then the next display is Off, CTCSS/DCS Search, then P25 NAC Search. I cannot get it to display "on" like I am able to to with my 396t or the 996t. Thanks. ]]> Uniden Scanners Dezdave http://forums.radioreference.com/uniden-scanners/164928-bcd-996xt.html http://forums.radioreference.com/uniden-scanners/164900-bct8-help.html Thu, 19 Nov 2009 22:13:50 GMT I have a BCT8 that I amtrying to program. I am trying to program OHP troop A and metro turnpikes. It is a type II system. The live OHP feed on this site is what I am trying to duplicate. I have the frequencies in,I have the groups in. What I am having problems with is getting it to scan just the id... I have a BCT8 that I amtrying to program. I am trying to program OHP troop A and metro turnpikes. It is a type II system. The live OHP feed on this site is what I am trying to duplicate. I have the frequencies in,I have the groups in. What I am having problems with is getting it to scan just the id lists. It scans all of the frequencies entered on that bank. I have the manual and have tried it every way that it can be interpreted. Can somebody tell me where I am going wrong? ]]> Uniden Scanners rdonchann http://forums.radioreference.com/uniden-scanners/164900-bct8-help.html http://forums.radioreference.com/uniden-scanners/164894-tgids-new-xt-firmware.html Thu, 19 Nov 2009 21:11:09 GMT ok i know with the new, firmware you get the unit ids... but my question is, in display mode two right now i get to see my tgids for the system im listening to. I f i download the new firmware, will that dissappear,?or will it rotate unit id and tgid... i know on the twiki it says rotation for... ok i know with the new, firmware you get the unit ids... but my question is, in display mode two right now i get to see my tgids for the system im listening to. I f i download the new firmware, will that dissappear,?or will it rotate unit id and tgid... i know on the twiki it says rotation for display mode one and two and something else for three... but i love to see my tgids... ]]> Uniden Scanners scannerface27 http://forums.radioreference.com/uniden-scanners/164894-tgids-new-xt-firmware.html http://forums.radioreference.com/uniden-scanners/164885-remote-head-bc-rh-96-no-longer-connects.html Thu, 19 Nov 2009 20:22:41 GMT I just got finished updating the firmware on one of my remote heads and that went without incident. The second will no longer recognize anything connected to it (ie bcd996t, bcd396t or 396xt). I attempted to re install the firmware and the unit shows 2.0 version. After that I reset the head... I just got finished updating the firmware on one of my remote heads and that went without incident. The second will no longer recognize anything connected to it (ie bcd996t, bcd396t or 396xt). I attempted to re install the firmware and the unit shows 2.0 version. After that I reset the head without success...i'm getting ready to box it up and ship back to uniden for repair... I also checked the port and the CChannel as listed in the update. Any other ideas? UPman? Please help...

Also my bcd396t speaker just quit, but if i rig it just right some sound comes out an external speaker....this will be the 4th time back at Uniden's repair shop for that model... ]]> Uniden Scanners LOf674 http://forums.radioreference.com/uniden-scanners/164885-remote-head-bc-rh-96-no-longer-connects.html http://forums.radioreference.com/uniden-scanners/164869-bct8-system-types.html Thu, 19 Nov 2009 15:51:30 GMT I am wondering if anyone can help me determine which system types goes with what the scanner displays. System Types: * Motorola Type IIi Hybrid * Motorola Type II Smartzone * EDACS Standard What displays on the scanner: * E2-800 (Motorola Type II 800 MHz) I am wondering if anyone can help me determine which system types goes with what the scanner displays.

System Types:
* Motorola Type IIi Hybrid
* Motorola Type II Smartzone
* EDACS Standard


What displays on the scanner:
* E2-800 (Motorola Type II 800 MHz)
* E2-Hi (Motorola Type II VHF 136-174 MHz) *
* E2-UHF (Motorola Type II UHF 406-512 MHz) *
* E1 (Motorola Type I and Hybrid) **
* Ed (EDACS® Wide Band: 9600 band)***
* Ed SCt (EDACS Scat) ]]> Uniden Scanners Bullmax http://forums.radioreference.com/uniden-scanners/164869-bct8-system-types.html http://forums.radioreference.com/uniden-scanners/164827-searching-scanning-uniden-bearcat-bcd996xt-under-butel-arc-xt-pro-software.html Thu, 19 Nov 2009 04:01:50 GMT I have been scanning with my Uniden Bearcat BCD996XT under Butel ARC XT PRO Software. Today I searched 162-174 mHz with digital only selected and NAC search on. Most of the logged hits make sense, but several have me puzzled. Two of them showed a NAC code "NONE" and two other ones showed "0" in the NAC column. As I understand it, if I am hearing valid APCO P-25 modulation it should log a legitimate NAC code, but the two displaying NONE and the two displaying 0 have me puzzled. Does anybody have any thoughts on this?

Also, on a somewhat related note, how does the BCD996XT behave if I select analog modulation only and a P25 signal is received? Does it simply mute the audio or does it scan past it? ]]> Uniden Scanners JASII http://forums.radioreference.com/uniden-scanners/164827-searching-scanning-uniden-bearcat-bcd996xt-under-butel-arc-xt-pro-software.html http://forums.radioreference.com/uniden-scanners/164808-996xt-updates.html Wed, 18 Nov 2009 23:44:24 GMT I have been reading about this update for 996XTs that has unit IDs in it.I have looked on the uniden firmware download page but there is nothing for this model. Were is this being found? I have been reading about this update for 996XTs that has unit IDs in it.I have looked on the uniden firmware download page but there is nothing for this model. Were is this being found? ]]> Uniden Scanners 1hdrdr http://forums.radioreference.com/uniden-scanners/164808-996xt-updates.html http://forums.radioreference.com/uniden-scanners/164800-uniden-bc355c-pre-release-thread.html Wed, 18 Nov 2009 22:34:46 GMT Have I missed a discussion on this? I found this on Universals web site. I want to know more about it. Uniden Bearcat BC355C Scanner BC-355C (http://www.universal-radio.com/catalog/scanners/4445.html) Have I missed a discussion on this? I found this on Universals web site. I want to know more about it.
Uniden Bearcat BC355C Scanner BC-355C ]]> Uniden Scanners SLJ2137694 http://forums.radioreference.com/uniden-scanners/164800-uniden-bc355c-pre-release-thread.html http://forums.radioreference.com/uniden-scanners/164769-396xt-wish.html Wed, 18 Nov 2009 15:08:55 GMT I don't know if this has ever been brought up here, but I wish that there was a Clock on the display of the 396XT, (T). Maybe where the Voltage Indicator is, where you could "toggle" between the two. Just a thought. As, I am always looking to see what Time it is while using the scanner. ]]> Uniden Scanners 325xia http://forums.radioreference.com/uniden-scanners/164769-396xt-wish.html http://forums.radioreference.com/uniden-scanners/164767-scanner-registration-uniden-upman.html Wed, 18 Nov 2009 14:52:34 GMT I just sold my BCD396T and wish to transfer it to a new user so they can have it registered on Uniden for downloads and updates. Has anyone ever done this? Should I delete it from my account? Will they then be able to add it to their account? I just sold my BCD396T and wish to transfer it to a new user so they can have it registered on Uniden for downloads and updates.

Has anyone ever done this? Should I delete it from my account? Will they then be able to add it to their account? ]]> Uniden Scanners hdcoley2 http://forums.radioreference.com/uniden-scanners/164767-scanner-registration-uniden-upman.html http://forums.radioreference.com/uniden-scanners/164738-question-xt-line-cc-logging.html Wed, 18 Nov 2009 00:52:29 GMT Hi all,

I'm not near any trunk systems right now, so I can't test this out - hence I'm asking you if it'll work.

On the XT scanners, with the CC Logging option enabled scanner-wide, will any frequency that receives a valid control channel (that the scanner can detect) start passing data thru to the computer, or does it have to be inside a properly set-up trunk system in the scanner?

Reason I ask is I had two ideas I was curious about: One, if I could load all my preferred control channels into a conventional system for ease of use, so I don't have to do anything but turn on (for example) quick key 99 and have my trunk CCs available for Unitrunker. Two, if I am in frequency search mode and come across a CC, if it would pass the data to the computer (and UT) without me having to create a trunk system of the right type, adding the freq manually, and etc.

Thanks in advance! ]]> Uniden Scanners Jay911 http://forums.radioreference.com/uniden-scanners/164738-question-xt-line-cc-logging.html http://forums.radioreference.com/uniden-scanners/164662-fire-tone-out.html Tue, 17 Nov 2009 01:51:29 GMT I have some fire departments using the following two tone pairs: Tone A Tone B 953.7 hZ 568.7 hZ 953.7 hZ 399.8 hZ 953.7 hZ 600.9 hZ ... I have some fire departments using the following two tone pairs:

Tone A Tone B

953.7 hZ 568.7 hZ
953.7 hZ 399.8 hZ
953.7 hZ 600.9 hZ
953.7 hZ 953.7 hZ

If I set my device to:

Tone A Tone B

953.7 hZ 0

will it open up for all agencies that have the A Tone of 953.7 hZ?




Conversely, I have some other fire departments using the following two tone pairs:


Tone A Tone B

726.8 hZ 832.5 hZ
1217.8 hZ 832.5 hZ
569.1 hZ 832.2 hZ
368.5 hZ 832.5 hZ
510.5 hZ 832.5 hZ

If I set my device to:

Tone A Tone B

0 832.5 hZ

will it open up for all agencies that have the B Tone of 832.5 hZ?

I know that timing used to be a concern, but I understand that firmware updates have made this a non-issue. I probably will try this at some point, but I suspect that somebody here already knows the answer. ]]> Uniden Scanners JASII http://forums.radioreference.com/uniden-scanners/164662-fire-tone-out.html http://forums.radioreference.com/uniden-scanners/164643-uniden-bct-15-issues.html Mon, 16 Nov 2009 22:19:03 GMT Hey guys, I am having "in and out" reception with my Uniden BCT15 scanner receiving FDNY EMS dispatch frequencies. Sometimes it comes in perfectly and other times not so much. This is never the case on my Vertex VX 800 portable. I have everything set correctly, freq, pl, modulation to fm. Anyone know what to do? Tried repositioning nothing seems to work. ]]> Uniden Scanners willr10 http://forums.radioreference.com/uniden-scanners/164643-uniden-bct-15-issues.html http://forums.radioreference.com/uniden-scanners/164636-bc396xt-l-o-everything-except-desired-system.html Mon, 16 Nov 2009 19:45:33 GMT Hello,

First off, mea culpa — I'm a scanner newbie, and will likely stay that way. I have simple needs, to be honest. And one of those simple needs is to easily, without having to hookup my scanner to a computer, to be able to lockout every System I have programmed, except for one that I want to listen to. I know I can do it with lots of twisting-and-pushing, but I'm curious —*is there a shortcut method for the BC396XT that will allow me to do something like this? Like —*if I am presently listening to a System, some jigging and poking to convey to the device that I want to stay scanning in this System and not any others —*not this *Public Service* generic scan, or any other System I may have programmed.

I could go through the super baroque manual, but I'm hoping someone can just help a fella out.

Julian

Near Future Laboratory
http://www.nearfuturelaboratory.com ]]> Uniden Scanners darthjulian http://forums.radioreference.com/uniden-scanners/164636-bc396xt-l-o-everything-except-desired-system.html http://forums.radioreference.com/uniden-scanners/164630-bearcat-120xl-handheld-need-help-n0-power-ac.html Mon, 16 Nov 2009 17:53:54 GMT Hi everyone. I just found your site and I thought I would post a problem I am having to see if anyone out there knows what I need to look for to get my scanner to work again. As in the title it is a Bearcat Twin Turbo BC-120XL and it works fine with a charged battery but will not power on with... Hi everyone. I just found your site and I thought I would post a problem I am having to see if anyone out there knows what I need to look for to get my scanner to work again.

As in the title it is a Bearcat Twin Turbo BC-120XL and it works fine with a charged battery but will not power on with an AC adapter. I am using an AD-70U power adapter. Is there something wrong that would make it work with the batteries but not the AC power plug. I checked the prongs and they are intact. I also used a meter and it is getting power though the plug socket. The adapter charges batteries fine. Any ideas what to look for?

Thanks! ]]> Uniden Scanners daveyh http://forums.radioreference.com/uniden-scanners/164630-bearcat-120xl-handheld-need-help-n0-power-ac.html http://forums.radioreference.com/uniden-scanners/164627-396t-motorola-type-ii-smartzone.html Mon, 16 Nov 2009 17:22:43 GMT The Harris County Regional Radio System ( Harris County Regional Radio System (Motorola) Trunking System, Metro Houston area, Texas - Scanner Frequencies (http://www.radioreference.com/apps/db/?sid=38) ) is a Motorola Type II SmartZone system with multiple sites and control channels. I... The Harris County Regional Radio System ( Harris County Regional Radio System (Motorola) Trunking System, Metro Houston area, Texas - Scanner Frequencies ) is a Motorola Type II SmartZone system with multiple sites and control channels.

I programmed all of the control channels in one system on the 396T. I thought the radio would go from control channel to control channel as it scanned. Instead the radio will find a control channel, use it to check for activity in the programmed talkgroups, then resume scanning and skip the other control channels. For example, the radio may find a weak control channel, use it then skip the strong control channel from a tower nearer to my location.

I had hoped to avoid programming each tower as a separate system because of the large number of talkgroups.

A method that seems to work is to lock out all CCs other than the strongest one. That is ok when stationary but not so good when traveling around the area covered by the system. ]]> Uniden Scanners kkn50 http://forums.radioreference.com/uniden-scanners/164627-396t-motorola-type-ii-smartzone.html http://forums.radioreference.com/uniden-scanners/164621-bc396xt-tone-squelch.html Mon, 16 Nov 2009 16:36:05 GMT My BC396XT seems to have trouble detecting the 127.3Hz PL tone from a couple stations. It tends to be in and out a bit. I thought it might be the transmitters, but all my other capable radios (2x BC780s, BC296D, Kenwood TMG707A, and Yaesu VX7R) have all detected it with no problem. So far it... My BC396XT seems to have trouble detecting the 127.3Hz PL tone from a couple stations. It tends to be in and out a bit. I thought it might be the transmitters, but all my other capable radios (2x BC780s, BC296D, Kenwood TMG707A, and Yaesu VX7R) have all detected it with no problem. So far it just seems to be this one tone. Has anyone else had any issues with this or any other tone? I'm wondering if its just a defect in just this particular scanner or common with this model. ]]> Uniden Scanners crevatis http://forums.radioreference.com/uniden-scanners/164621-bc396xt-tone-squelch.html http://forums.radioreference.com/uniden-scanners/164619-where-get-new-feet-bct-7-a.html Mon, 16 Nov 2009 16:05:07 GMT I have a old Beartracker BCT 7 scanner and the feet that holds it up broke off. Does anyone know of a source to get replacement parts? I have a old Beartracker BCT 7 scanner and the feet that holds it up broke off.

Does anyone know of a source to get replacement parts? ]]> Uniden Scanners jbantennaman http://forums.radioreference.com/uniden-scanners/164619-where-get-new-feet-bct-7-a.html http://forums.radioreference.com/uniden-scanners/164592-plunge-396xt.html Mon, 16 Nov 2009 00:40:55 GMT Hello Uniden folks:

I currently own a PRO-96 that has had display problems and I was leery of Radio Shack products in the first place. I've had it fixed once and don't want to sink any more money into this unit.

So, I'm considering the 396XT and it seems like a great scanner.

I do have a couple questions:
-Is there Uniden or third-party software to assist programming?
-Will this unit decode the 700 MHz systems?

Thanks,
Sammy ]]> Uniden Scanners sammyjenkis http://forums.radioreference.com/uniden-scanners/164592-plunge-396xt.html http://forums.radioreference.com/uniden-scanners/164587-bcd996t-help-firefighter-needs-help-programming.html Mon, 16 Nov 2009 00:03:39 GMT i was given a used bcd996t with nothing set in it. i found the info for baca county,springfield colorado so i just typed it in and i just here every few words. can someone help me. i am a fire fighter but we have to leave our radios at the station we rely on scanners to here call-outs please help. i was given a used bcd996t with nothing set in it. i found the info for baca county,springfield colorado so i just typed it in and i just here every few words. can someone help me. i am a fire fighter but we have to leave our radios at the station we rely on scanners to here call-outs please help. ]]> Uniden Scanners rescuetech0157 http://forums.radioreference.com/uniden-scanners/164587-bcd996t-help-firefighter-needs-help-programming.html http://forums.radioreference.com/uniden-scanners/164585-brand-new-bcd396xt.html Sun, 15 Nov 2009 23:58:59 GMT My new BCD396XT and BuTel ARC-XT-Pro software arrived Friday. I immediately printed the comprehensive operating manuals for both (76 pages for the software, 273 pages for the scanner) and placed them in binders. They certainly were intimidating! Having used both Butel and RR before, I decided to... My new BCD396XT and BuTel ARC-XT-Pro software arrived Friday. I immediately printed the comprehensive operating manuals for both (76 pages for the software, 273 pages for the scanner) and placed them in binders. They certainly were intimidating! Having used both Butel and RR before, I decided to give it a go without cracking the manuals. In less than an hour I installed the software, downloaded 10 trunked systems and 8 conventional systems from RR, installed everything onto the scanner, and had it all up and running in Virtual Control mode. I still have a lot to learn, but that will come in time. Many thanks to BuTel and RR for simplifying what would have otherwise been a monumental task.

Bill B.
San Antonio, Texas

BCD396XT
BC898T
BEARCAT I, II, III, IV, 5, 6, 8, 12, 15, 100, 101
BEARCAT THIN SCAN
BEARCAT FIVE-SIX
BEARCAT BC-W
REALISTIC PRO-2020 & PRO-2042
REGENCY MX-3000 & FLIGHT MONITORADIO
LAFAYETTE PF-60
ICOM IC-R75
GRUNDIG G6 AVIATOR
And a few parts sets ]]> Uniden Scanners ChiefBillB http://forums.radioreference.com/uniden-scanners/164585-brand-new-bcd396xt.html http://forums.radioreference.com/uniden-scanners/164565-question-about-bcd996xt-ltr-lcn-mapping.html Sun, 15 Nov 2009 19:29:09 GMT Ok so I have read everything I could find on mapping out the correct LCN for LTR systems and I still think I am missing something. Do I even need to worry about it on the 996xt? Do I need the correct LCN? Do I need only the home channels? Here is what I have done Setup a new system as LTR... Ok so I have read everything I could find on mapping out the correct LCN for LTR systems and I still think I am missing something. Do I even need to worry about it on the 996xt? Do I need the correct LCN? Do I need only the home channels?

Here is what I have done

Setup a new system as LTR LCN Search
Setup 20 Site frequencies as LCN X (where x is 1-20)
added the fixed base frequencies I found in the FCC database for a callsign which was listed as trunking and I know is LTR standard. Lets say the frequencies are 461.1 461.2 461.3 461.4 461.5

So LCN 1 has all 5 channle frequencies 461.1 461.2 ... set as LCN 1 I could do this through software not directly on the scanner.

I know or am pretty confident that 461.1 is LCN 1 and I get talkgroups A-HH-GGG as 01-01-XXX

LCN 2 has all five as LCN 2 etc down to 20

I was under the impression that if frequency 461.3 is say LCN 9 that if there was transmission the scanner would stop on site frequency LCN 9 and display the channel frequency 461.3?

What has happened is that I get transmission on LCN 1 as 461.1 and talkgroup 01-01-002 which makes sense if it is LCN 1. The only other transmissions I have recieved so far are on LCN 4 and LCN 7 and they stp and show frequency 461.1? and the talkgroups match the lcn ie on LCN 4 channel 461.1 I get talkgorup 01-04-002 and LCN 7 channel 461.1 I get talkgroup 01-07-002.

The transmissions on those sound the same as 0-01-002 as far as I can tell they seem like the same group talking.

I have read that this could be the busy/goto? But would it then not be on a different channel frequency as 461.1 could not be multiple LCN's?

Am I misunderstanding mapping an LTR system I did read all the threads and wiki? ]]> Uniden Scanners jdolina http://forums.radioreference.com/uniden-scanners/164565-question-about-bcd996xt-ltr-lcn-mapping.html http://forums.radioreference.com/uniden-scanners/164562-bcd396xt-bcd996xt-code-search.html Sun, 15 Nov 2009 18:53:01 GMT I have numerous conventional frequencies stored that I have not heard anything on yet. When I search using either scanner, if the search settings are set to use CTCSS/DCS Search, will I not pick up on any digital comms? Also, vice/versa, if it is set for NAC Search, will I not get any analog hits?... I have numerous conventional frequencies stored that I have not heard anything on yet. When I search using either scanner, if the search settings are set to use CTCSS/DCS Search, will I not pick up on any digital comms? Also, vice/versa, if it is set for NAC Search, will I not get any analog hits? Along the same idea, if I have a conventional frequency set for CTCSS/DCS Search, will I get any comms at all if it is actually digital? Again, vice/versa, if I had a freq set for NAC Search, will it not stop if there is analog comms?
Will I have to duplicate all the unknowns and set one for CTCSS/DCS and the other for NAC Search?
Thanks ahead for your input. ]]> Uniden Scanners feenjo http://forums.radioreference.com/uniden-scanners/164562-bcd396xt-bcd996xt-code-search.html http://forums.radioreference.com/uniden-scanners/164559-uniden-396t.html Sun, 15 Nov 2009 18:30:22 GMT Curious if anyone knows if Seattle Police have re-banded?? Was fine last night. Now it will not find control channel for Seattle. Other agencies for trunked are find. Curious if anyone knows if Seattle Police have re-banded?? Was fine last night. Now it will not find control channel for Seattle. Other agencies for trunked are find. ]]> Uniden Scanners redboneshadow http://forums.radioreference.com/uniden-scanners/164559-uniden-396t.html http://forums.radioreference.com/uniden-scanners/164555-bc346xt-belt-clip.html Sun, 15 Nov 2009 17:05:05 GMT My belt clip on my BC346XT broke :( and I need a new one. Is it possible to get a free replacememnt belt clip if the scanner is still under warranty? If so, who do I contact to get one? My belt clip on my BC346XT broke :( and I need a new one. Is it possible to get a free replacememnt belt clip if the scanner is still under warranty? If so, who do I contact to get one? ]]> Uniden Scanners kf4sek http://forums.radioreference.com/uniden-scanners/164555-bc346xt-belt-clip.html http://forums.radioreference.com/uniden-scanners/164552-uniden-bearcat-bcd396xt-bcd396xt-fire-tone-out-search-logging.html Sun, 15 Nov 2009 16:31:19 GMT I have been using the Butel ARC XT, but I want to be able to do unattended logging of Tone-Out Search. Does anybody know if any of the software programs currently log Tone-Out Search finds? Supporting Software * ARC-XT * FreeScan * IDTracker II I have been using the Butel ARC XT, but I want to be able to do unattended logging of Tone-Out Search. Does anybody know if any of the software programs currently log Tone-Out Search finds?

Supporting Software

* ARC-XT

* FreeScan

* IDTracker II

* ProScan

* Radio Manager Master XT ]]> Uniden Scanners JASII http://forums.radioreference.com/uniden-scanners/164552-uniden-bearcat-bcd396xt-bcd396xt-fire-tone-out-search-logging.html