http://forums.radioreference.com/ This is the place to discuss scanner programming and control software. en Fri, 20 Nov 2009 22:13:25 GMT vBulletin 60 http://forums.radioreference.com/images/misc/rss.jpg http://forums.radioreference.com/ http://forums.radioreference.com/scanner-programming-software/164938-win500-new-item-end.html Fri, 20 Nov 2009 14:50:33 GMT I believe this question was asked/answered before but I am unable to locate such.

Suppose I wish to add 5 new items to a scan list. Must I enter 5 separate "New Item at End" or can I enter all 5 "New Item at End" at once. If this is possible exactly what key strokes are involved? ]]> Scanner Programming Software ddoorman http://forums.radioreference.com/scanner-programming-software/164938-win500-new-item-end.html http://forums.radioreference.com/scanner-programming-software/164868-win96-program-question-nac.html Thu, 19 Nov 2009 15:50:13 GMT I've recently noticed when using RR import with Win96 (V01.66), when it imports a P25 NAC, it gets the correct NAC placed in the CT/DC spot, but it sets the RX mode as DC instead of MOT.
For that Bank, I have it set as MOT. That particular bank has both P25 channels as well as analog.
I can manually go in and change it with Win96, but think that the import should do this automatically, or am i doing something wrong? ]]> Scanner Programming Software mo1dmat http://forums.radioreference.com/scanner-programming-software/164868-win96-program-question-nac.html http://forums.radioreference.com/scanner-programming-software/164862-win96-import-problem-trunked-systems.html Thu, 19 Nov 2009 14:10:00 GMT I am having a problem with win96 importing trunked systems, it does conventional just fine. It starts to import the trunk system after close to 5 minutes, (used to take seconds) then i get a pop up that says something about a second win96 running. I do see two win96exe in task manger, but if I... I am having a problem with win96 importing trunked systems, it does conventional just fine.
It starts to import the trunk system after close to 5 minutes, (used to take seconds)
then i get a pop up that says something about a second win96 running.
I do see two win96exe in task manger, but if I close either one it closes the program.
Anyone else run into this issue? I have V1.66 thanks for any help. Mike ]]> Scanner Programming Software gtor72 http://forums.radioreference.com/scanner-programming-software/164862-win96-import-problem-trunked-systems.html http://forums.radioreference.com/scanner-programming-software/164856-error-connecting-win96.html Thu, 19 Nov 2009 13:02:56 GMT Trying to login to RR from Win96, I've gotten a dialog with the following message, and the dialog says I should post it to the forums to get it fixed. Here it is:
-----------
XML error detected: no element found

near:


^

while requesting URL:
http://www.radioreference.com/apps/xml1.1/?ol=1 ]]> Scanner Programming Software dooz http://forums.radioreference.com/scanner-programming-software/164856-error-connecting-win96.html http://forums.radioreference.com/scanner-programming-software/164844-arc-xt-pro-virtual-control-scanning-problem.html Thu, 19 Nov 2009 07:21:25 GMT Not sure if anyone has been having this issue also or if it is just something that I have programmed wrong. For the past few days I have noticed that I have been missing a lot of transmissions over my scanner. (BCT15X) I have re-programmed my scanner several times over the past few days trying... Not sure if anyone has been having this issue also or if it is just something that I have programmed wrong.

For the past few days I have noticed that I have been missing a lot of transmissions over my scanner. (BCT15X) I have re-programmed my scanner several times over the past few days trying to figure out what the problem is. However I noticed tonight that I had the Virtual Control (VC) page up and my county had dispatched an ems call. I had only heard about 2-3 seconds of the dispatch and then my scanner went back into scan mode and then I caught the last 2-3 seconds of the end of the dispatch. That is what it has been doing for the past few days. So I immedietly closed out my VC and when the county was giving the info for the call the scanner stayed on the correct channel and didn't go into scan mode like it has been.

So to be sure of my problem I got my portable fire radio, I turned on the VC and then keyed up on a channel, the scanner itself stopped on the channel that I had keyed up on for 2-3 seconds, resumed scanning through all the frequencies and then stoppped again on the channel that I kept keyed up on. I closed the VC and did the test again and my scanner stayed on the channel that I had keyed up on until I let go of the mic.

So my question is are there other people having this problem also, or is it something that I may have wrong on my part? Any help would be greatly appreciated. ]]> Scanner Programming Software clgerwick http://forums.radioreference.com/scanner-programming-software/164844-arc-xt-pro-virtual-control-scanning-problem.html http://forums.radioreference.com/scanner-programming-software/164759-newbee.html Wed, 18 Nov 2009 07:47:40 GMT I just purchased a uniden BC95XLT I am unable to download any frequencies using software. The software will not start I just purchased a uniden BC95XLT I am unable to download any frequencies using software. The software will not start ]]> Scanner Programming Software Rif_Raf http://forums.radioreference.com/scanner-programming-software/164759-newbee.html http://forums.radioreference.com/scanner-programming-software/164736-arc-xt-v-1-4-build-1-problems-new-version.html Wed, 18 Nov 2009 00:06:35 GMT V1.4 build 1 does not display UIDs when using Display Mode 3. It seems to only display when using Display Modes 1 or 2. The column for UIDs shows on the log, but fails to actually log UIDs, even though they appear on the Virtual Control screen (when in either Display Mode 1 or 2 only). Others... V1.4 build 1 does not display UIDs when using Display Mode 3. It seems to only display when using Display Modes 1 or 2. The column for UIDs shows on the log, but fails to actually log UIDs, even though they appear on the Virtual Control screen (when in either Display Mode 1 or 2 only).

Others who are experiencing the same issue, please report here with this or any other problems you are having with V 1.4 Build 1. ]]> Scanner Programming Software sjlamb http://forums.radioreference.com/scanner-programming-software/164736-arc-xt-v-1-4-build-1-problems-new-version.html http://forums.radioreference.com/scanner-programming-software/164711-remote-audio.html Tue, 17 Nov 2009 19:44:13 GMT I have a GRECOM PSR-500 scanner with WIN500 software version 1.81. I am able to control the radio from my software on my computer locally and the audio comes over the speaker on the radio. What I would like to do is place the radio in a different city and control the radio and hear the audio... I have a GRECOM PSR-500 scanner with WIN500 software version 1.81. I am able to control the radio from my software on my computer locally and the audio comes over the speaker on the radio.

What I would like to do is place the radio in a different city and control the radio and hear the audio over the network. Does anyone have other ideas on how I can make this happen?

Don ]]> Scanner Programming Software DonCoP http://forums.radioreference.com/scanner-programming-software/164711-remote-audio.html http://forums.radioreference.com/scanner-programming-software/164672-win500client-mobile.html Tue, 17 Nov 2009 03:35:06 GMT Just flashed to a new ROM WinMo 6.5 TF3d 2.5 sense UI on my touch diamond, I'm getting an error when I try to run WIN500client

"System.Windows.Forms,
Version=3.5.0.0, culture=neutral,
PublicKey Token=969DB8053D3322AC or
one of its dependencies, was not found"

My guess is that's because TF3d 2.5 uses .net3.7, but I'm not sure does anyone know? ]]> Scanner Programming Software Astrak http://forums.radioreference.com/scanner-programming-software/164672-win500client-mobile.html http://forums.radioreference.com/scanner-programming-software/164657-bc898t-ss-serial-port-error-help.html Tue, 17 Nov 2009 01:03:51 GMT I am using the uniden BC898T SS software for my BC898T scanner.
I bought the full version.

I had it up and running, and controlling it thru my computer, etc...

now all of a sudden, without changing any settings, I am getting an error message that says "Error opening serial port"

I have not changed any settings, All my settings are still set the same, and i uninstalled and reinstalled the software, and it still does NOT work!

Please help! ]]> Scanner Programming Software freybearfreakfan http://forums.radioreference.com/scanner-programming-software/164657-bc898t-ss-serial-port-error-help.html http://forums.radioreference.com/scanner-programming-software/164632-win500-pro-197-help.html Mon, 16 Nov 2009 19:07:52 GMT I just downloaded Win500.

I clicked on the link for the updated driver but that goes to a broken page but give the option of downloading /Drivers/CDM/CDM 2.06.00 WHQL Certified.zip which I did and manually updated my USB Serial Port (COM4) with the drivers in that file as it didn't come with an installation.

When I try to import my scanner I get a message
"Error can'tt load the FTDI driver.
You can obtain the current FTDI drivers from http://www.ftdichip.com/drivers/vcp.htm"

That link contains the same zip file I downloaded and updated my USB driver with.

I'm new programmer scanning and am very confused.

Thanks in advance for any help.
John ]]> Scanner Programming Software Kearsarge http://forums.radioreference.com/scanner-programming-software/164632-win500-pro-197-help.html http://forums.radioreference.com/scanner-programming-software/164601-glentek-rte-controller-remote-scanners.html Mon, 16 Nov 2009 02:23:01 GMT Anybody using these on scanners so you don't need a PC for the interface? I would love to use this with ProScan on my 996XT. ]]> Scanner Programming Software carbineone http://forums.radioreference.com/scanner-programming-software/164601-glentek-rte-controller-remote-scanners.html http://forums.radioreference.com/scanner-programming-software/164581-bc898t-best-software.html Sun, 15 Nov 2009 21:56:21 GMT What is the best BC898T software? Cheaper the better I am currently using the uniden software, full version. But i am looking for a program if possible to download the freq from RR, and upload em into my scanner that way. The uniden software is unable to provide this feature. What is the best BC898T software? Cheaper the better

I am currently using the uniden software, full version.


But i am looking for a program if possible to download the freq from RR, and upload em into my scanner that way. The uniden software is unable to provide this feature. ]]> Scanner Programming Software freybearfreakfan http://forums.radioreference.com/scanner-programming-software/164581-bc898t-best-software.html http://forums.radioreference.com/scanner-programming-software/164568-help-freesacan-cook-county.html Sun, 15 Nov 2009 20:18:39 GMT First I'd like to say what a great site with a wealth of accurate information! I recently upgrading my account to prem status to take advantage of programming my Uniden BCT15 with FreeSCAN. Everything has worked great and programming has been a breeze with the seamless integration with radio ref database. I am in the NW Suburbs of Chicago and have been able to successfully programs Lake and McHenry counties in Illinois as well as Kenosha county in Wisconsin as far as conventional scanning goes. I have also added trunked programming for those counties.

My snag lies with conventional freg programming for cook county. When I log in using FreeSCAN and enter in all pertinent info like country and state everything functions, menus are populated, etc. When I choose county things seem to hang when selecting cook, awaiting the list to propogate with frequencies. I have been able to program trunked cook freqs but no luck with conventional...it erros out in which case I can choose to "conmtinue" and nothing new happens or "quit" and the program closes. It's as if the program is hanging, almost timing out waiting for the cook county freq's to populate. Could it be the sure amount of cook county frequencies that is causing the issue with FreeSCAN? Is there anyway to download a file from Radio Reference and import those cook county frequencies into FreeSCAN to avoid the menu populating issue?

Anyone experience this before?

Thanks in advance for your time. ]]> Scanner Programming Software mikemsu1 http://forums.radioreference.com/scanner-programming-software/164568-help-freesacan-cook-county.html http://forums.radioreference.com/scanner-programming-software/164501-new-pro-106-best-software.html Sat, 14 Nov 2009 23:35:02 GMT I own a pro 96 and used the win96 program wondering if the win500 is the best option for the pro 106 or if there was a free software for the pro 106? I own a pro 96 and used the win96 program wondering if the win500 is the best option for the pro 106 or if there was a free software for the pro 106? ]]> Scanner Programming Software weisej http://forums.radioreference.com/scanner-programming-software/164501-new-pro-106-best-software.html http://forums.radioreference.com/scanner-programming-software/164496-win96-start-up-problem.html Sat, 14 Nov 2009 23:20:44 GMT I am familiar with Win96 and used it for several years. I am a registered users and Win 96 runs fine on my older Dell.

However, I have now loaded the current version on a new computer but I can't get it working.

I unzipped it into its own directory and then clicked the .exe file. I was able to load the name and key, but then I always get an error message saying:

Cannot find import; DLL may be missing, corrupt or wrong version. File "RRlib.DLL", Function " ?GETTRS_SYSTEM@CRR@RRINTERFACE@@QAEHHHPAPAVCTRS_SY STEM_BASE@2@@Z" (Error 126)

I saw the notice about .NET so I downloaded .NET. No change--still can't get the program to open.

I saw the notice about unblocking the DLLs. Did that. No change--program won't open.

I'm familiar with Win96, but I can't get it to open. Help would be appreciated.

System is a fairly new Dell with XP Professional.

Thanks.

Steve, N4TX ]]> Scanner Programming Software skthomp http://forums.radioreference.com/scanner-programming-software/164496-win96-start-up-problem.html http://forums.radioreference.com/scanner-programming-software/164459-importing-996t-files-into-xtpro.html Sat, 14 Nov 2009 13:55:22 GMT I recently got XT pro and while I can import 396t files no problem it will not let me import 996t files even though I save them the same was as I do my 396 files. I am using windows 7 so I am wondering if this is a bug as there is a couple of arc 996 bugs and 396 bugs in windows 7 or a bug... I recently got XT pro and while I can import 396t files no problem it will not let me import 996t files even though I save them the same was as I do my 396 files.

I am using windows 7 so I am wondering if this is a bug as there is a couple of arc 996 bugs and 396 bugs in windows 7 or a bug with the user. ]]> Scanner Programming Software mrozitis http://forums.radioreference.com/scanner-programming-software/164459-importing-996t-files-into-xtpro.html http://forums.radioreference.com/scanner-programming-software/164398-help-database-import-using-win-500-a.html Fri, 13 Nov 2009 17:17:56 GMT I get the following error when trying to do a web import in Win 500??? XML error detected: no element found near: ^ while requesting URL: I get the following error when trying to do a web import in Win 500???

XML error detected: no element found

near:


^

while requesting URL:
http://www.radioreference.com/apps/xml1.1/?ol=1 ]]> Scanner Programming Software gs_new http://forums.radioreference.com/scanner-programming-software/164398-help-database-import-using-win-500-a.html http://forums.radioreference.com/scanner-programming-software/164367-error-msg-radiorefdisconnected.html Fri, 13 Nov 2009 04:56:47 GMT The full message reads: RadioRefDisconnected, wait retrieving HTTP data. It appears after I have opened my BUTEL software for a Uniden 996T. The software was purchased prior to joining RR, and I am a paying member of RR. The software does control the radio, successfulling reading the systems. ... The full message reads: RadioRefDisconnected, wait retrieving HTTP data. It appears after I have opened my BUTEL software for a Uniden 996T. The software was purchased prior to joining RR, and I am a paying member of RR. The software does control the radio, successfulling reading the systems. I welcome and would appreciate any assistance. Are there drivers that are unique to RR for a connection?
Ed ]]> Scanner Programming Software myslate http://forums.radioreference.com/scanner-programming-software/164367-error-msg-radiorefdisconnected.html http://forums.radioreference.com/scanner-programming-software/164312-need-help-programming-pro-106-a.html Thu, 12 Nov 2009 18:40:26 GMT Need help programming pro-106
Have installed psredit500. programs looks great but not sure on how to use it. i'm also using programming cable from radioshack. Any help would be great! ]]> Scanner Programming Software louisaelec http://forums.radioreference.com/scanner-programming-software/164312-need-help-programming-pro-106-a.html http://forums.radioreference.com/scanner-programming-software/164274-arc-xt-p25-nac-status.html Thu, 12 Nov 2009 03:45:53 GMT Howdy, everyone. For those using the ARC-XT software, what is the P25 NAC Status field? 73s Howdy, everyone.

For those using the ARC-XT software, what is the P25 NAC Status field?

73s ]]> Scanner Programming Software realgeo http://forums.radioreference.com/scanner-programming-software/164274-arc-xt-p25-nac-status.html http://forums.radioreference.com/scanner-programming-software/164267-arc-xt-bug-1-3b1-question.html Thu, 12 Nov 2009 03:06:25 GMT Greetings! Long-time user of ARC396 and now ARC-XT. Looks like 1.3 build 1 may have a bug in the Trunk System Paramters tab screen. The MotEndCode field is nearly invisible, but once you click the field, the drop options appear. Previous 1.2 build 2 does NOT have this issue - running... Greetings!

Long-time user of ARC396 and now ARC-XT.

Looks like 1.3 build 1 may have a bug in the Trunk System Paramters tab screen. The MotEndCode field is nearly invisible, but once you click the field, the drop options appear.

Previous 1.2 build 2 does NOT have this issue - running Windows XP Home Edition.

Also, a simple question. I don't see anywhere an option that lets me enable or disable the I-Calls for a particular system. Seems to me that this was available in a previous version. I'm not able to locate this option for either Analog or P25 Motorola trunked systems.

Thanks for the GREAT product!

George B. ]]> Scanner Programming Software realgeo http://forums.radioreference.com/scanner-programming-software/164267-arc-xt-bug-1-3b1-question.html http://forums.radioreference.com/scanner-programming-software/164253-win-97-downloading-problems.html Thu, 12 Nov 2009 01:35:57 GMT I have uesd the Win 97 progam for several years and I don't understand why I now I have this problem. When I try to download from the database with Win97 Vol 1.12 I receive the message "XLM error detetced:no elememt found". Then it tells me to contact to RR forums. My RR dues are paid and I am using Windows XP home addition. ]]> Scanner Programming Software weave http://forums.radioreference.com/scanner-programming-software/164253-win-97-downloading-problems.html http://forums.radioreference.com/scanner-programming-software/164248-bc895xlt-software.html Thu, 12 Nov 2009 00:58:39 GMT For uses of the Uniden BC895XLT, what is the best software that is still made to use with this radio? I have been using an older (DOS) Scan Star Deluxe, however the computer has died and I need to find something that will run on Windows XP For uses of the Uniden BC895XLT, what is the best software that is still made to use with this radio?

I have been using an older (DOS) Scan Star Deluxe, however the computer has died and I need to find something that will run on Windows XP ]]> Scanner Programming Software KerryCochran http://forums.radioreference.com/scanner-programming-software/164248-bc895xlt-software.html http://forums.radioreference.com/scanner-programming-software/164160-win500-help-file.html Wed, 11 Nov 2009 01:11:53 GMT How many years does it take to wright a help file for win500? How many years does it take to wright a help file for win500? ]]> Scanner Programming Software Ghost4658 http://forums.radioreference.com/scanner-programming-software/164160-win500-help-file.html http://forums.radioreference.com/scanner-programming-software/163955-new-version-1-89-psr500.html Sun, 08 Nov 2009 15:06:12 GMT Good morning to the group.
Updated to 1.89 and now I find that when I'm in the Monitor/Control window, the entries down in the lower right box are showing/logging the TG just before the correct TG. Happens on all systems, RWC, MCSO, Etc. Did not have this problem with the earlier version.

Thanks

Robert in Phoenix ]]> Scanner Programming Software WA6IJD http://forums.radioreference.com/scanner-programming-software/163955-new-version-1-89-psr500.html http://forums.radioreference.com/scanner-programming-software/163911-win-500-download-trouble.html Sun, 08 Nov 2009 00:26:59 GMT while running the starsoft program,I tried to download and program some new freqs to m scanner annd got this message "XML error detected: no element found

near:


^

while requesting URL:
http://www.radioreference.com/apps/xml1.1/?ol=1"can any one tell me what to do?
pleasefeel free to write, rafeg@optonline.net ]]> Scanner Programming Software rafeg http://forums.radioreference.com/scanner-programming-software/163911-win-500-download-trouble.html http://forums.radioreference.com/scanner-programming-software/163891-new-bcd396xt.html Sat, 07 Nov 2009 18:39:44 GMT Recently purchased new Uniden BCD396XT with Mr. Scanner and Scan Cat Lite programming software. Any programming software recommendations? Recently purchased new Uniden BCD396XT with Mr. Scanner and Scan Cat Lite programming software. Any programming software recommendations? ]]> Scanner Programming Software SC_Scan http://forums.radioreference.com/scanner-programming-software/163891-new-bcd396xt.html http://forums.radioreference.com/scanner-programming-software/163772-win-500-client-error.html Fri, 06 Nov 2009 03:36:35 GMT When I Connect Through Win 500 I get this error. WAVEOUT:20:The Specified Format Is Not Supported Or Cannot Be Translated Use The Capabilities Function To Determine The Supported Formats Sometimes If I click ok it will let me connect and sometimes I get cannot connect when the info is all... When I Connect Through Win 500 I get this error.

WAVEOUT:20:The Specified Format Is Not Supported Or Cannot Be Translated Use The Capabilities Function To Determine The Supported Formats

Sometimes If I click ok it will let me connect and sometimes I get cannot connect when the info is all right. Is there a way to fix this? ]]> Scanner Programming Software btritch http://forums.radioreference.com/scanner-programming-software/163772-win-500-client-error.html http://forums.radioreference.com/scanner-programming-software/163725-pro96-priority-setting.html Thu, 05 Nov 2009 19:29:34 GMT Can anyone tell me if a talkgroup within a trunked system can be set as the priority on a Pro96 using Win96? Can anyone tell me if a talkgroup within a trunked system can be set as the priority on a Pro96 using Win96? ]]> Scanner Programming Software dleamon http://forums.radioreference.com/scanner-programming-software/163725-pro96-priority-setting.html