BadouBadou
Newbie
- Joined
- May 7, 2016
- Messages
- 1
Dear all,
I just acquire an Icom handheld IC-F4262DT and I need help to program it.
Firstly the firmware revisions are the following :
REV 2.6d - SumD417
DREV 3.2 - DSumF961
Screen displays also : BLD F3E1 (I don't know what does it mean)
So my first question is : Is it the last firmware revision ? Do I have to upgrade it ?
Secondly I tried several PC software to program it but the handheld is never recognized, I tried with CS-F3160-F5060 rev 2.6, 4.2, 5.0 and 5.2 ; I also tried to establish a communication with CS-F3160_F5060 ADJ rev 4.0 without success...
Do I use the correct PC software ? Do I have to use an other ?
I checked the serial transmission with a serial port spy program, exchange are good between the radio and the PC, so the USB cable (an OPC-1862 genuine) seems to be good.
Any help would be appreciated...
Many thanks by advance.
I just acquire an Icom handheld IC-F4262DT and I need help to program it.
Firstly the firmware revisions are the following :
REV 2.6d - SumD417
DREV 3.2 - DSumF961
Screen displays also : BLD F3E1 (I don't know what does it mean)
So my first question is : Is it the last firmware revision ? Do I have to upgrade it ?
Secondly I tried several PC software to program it but the handheld is never recognized, I tried with CS-F3160-F5060 rev 2.6, 4.2, 5.0 and 5.2 ; I also tried to establish a communication with CS-F3160_F5060 ADJ rev 4.0 without success...
Do I use the correct PC software ? Do I have to use an other ?
I checked the serial transmission with a serial port spy program, exchange are good between the radio and the PC, so the USB cable (an OPC-1862 genuine) seems to be good.
Any help would be appreciated...
Many thanks by advance.