Proggramming Tk-2312 help

[zane018]

So this may be a simple fix or a dumb question but i'm stumped. I have gotten all my frequencies in the radio, when selecting between zones it works fine. The problem is once on a zone it says the zone name but i'm unable to select a channel in that zone. When i press channel up or down it does nothing. Does anyone know what dumb mistake i am making?

[kayn1n32008]

Wirelessly posted (Mozilla/5.0 (iPad; CPU OS 6_0_1 like Mac OS X) AppleWebKit/536.26 (KHTML, like Gecko) Version/6.0 Mobile/10A523 Safari/8536.25)

Not familiar with that particular radio but you may need to assign the up/down buttons to be able to change channels

[zane018]

i figured that out, however now when using the pager i'm trying to figure out how to silence the radio until the set tones are sent

[ramal121]

Originally Posted by zane018

i figured that out, however now when using the pager i'm trying to figure out how to silence the radio until the set tones are sent

1) Go to 2tone and set up your tones in one of three decode tabs.

2) On the channel you would like this to happen, set optional signalling to 2tone-1 (or 2, or 3, whichever one you set up in decode).

3) In the zone information screen for the channel you selected, set audio control to "QT/DQT + optional signalling"

Piece of cake.

[kayn1n32008]

Wirelessly posted (Mozilla/5.0 (BlackBerry; U; BlackBerry 9780; en-US) AppleWebKit/534.8+ (KHTML, like Gecko) Version/6.0.0.600 Mobile Safari/534.8+)

Originally Posted by ramal121

1) Go to 2tone and set up your tones in one of three decode tabs.

2) On the channel you would like this to happen, set optional signalling to 2tone-1 (or 2, or 3, whichever one you set up in decode).

3) In the zone information screen for the channel you selected, set audio control to "QT/DQT + optional signalling"

Piece of cake.

Thanks Ramal, I do not use 2tone, and have never palyed with it at all.

[zane018]

Thanks guys!! Works great!!