Warren Radio Testing

seamusg · #1 (**permalink**) 08-29-2005, 06:53 PM

Heard what sounded like grid testing on Warren's radio system today on TG 176

Thunderbolt · #2 (**permalink**) 08-29-2005, 09:46 PM

They might be doing some testing before the new system goes online, so they can compare signal strengths. Check their other channels and see if you hear a new 9600 baud control channel on it?

73's

Ron

seamusg · #3 (**permalink**) 08-29-2005, 11:04 PM

It was the old system the best that I can tell (No P25). The testing was on both the North and South End
Alot was inside buildings. There is known dead spots on the South End. One is at our club next to Wite Ways (8mi and Van Dyke).

mikey60 · #4 (**permalink**) 08-29-2005, 11:20 PM

Quote:

Originally Posted by Thunderbolt

They might be doing some testing before the new system goes online, so they can compare signal strengths. Check their other channels and see if you hear a new 9600 baud control channel on it?

I've been checking for a 9600bps control channel every couple days, nothing so far...

Mike

seamusg · #5 (**permalink**) 08-30-2005, 12:00 AM

Quote:

Originally Posted by mikey60

I've been checking for a 9600bps control channel every couple days, nothing so far...

Mike

It sounded like someone, mabee MOT wants to see how it works now. I'm going to set up one of my scanners in the morning to see if it's 9600 if I hear it again.

mikey60 · #6 (**permalink**) 08-30-2005, 10:31 AM

Quote:

Originally Posted by seamusg

It sounded like someone, mabee MOT wants to see how it works now. I'm going to set up one of my scanners in the morning to see if it's 9600 if I hear it again.

From what I've read in the past, it's not unusual to do grid testing on the old system before installing or turning on a new system. This allows the techs and system operators to know what the differences in the systems are.

I live close enough to Warren to be able to hear it when it comes on without problems. (I work just across Dequindre, and live not too far away from there).

Mike

seamusg · #7 (**permalink**) 08-30-2005, 10:16 PM

The voices I heard today sound like FD Command is doing the testing. It is on the old system, not P25.

seamusg · #8 (**permalink**) 09-01-2005, 07:10 PM

Heard Waren testing a new radio today. Question my pro96 is showing MOT36 - is this correct for the old system - I never paid attention to the old system.

mikey60 · #9 (**permalink**) 09-01-2005, 10:39 PM

Quote:

Originally Posted by seamusg

Heard Waren testing a new radio today. Question my pro96 is showing MOT36 - is this correct for the old system - I never paid attention to the old system.

Yes, this is correct.

The new system when it goes on line is supposed to be 9600bps.

Mike

seamusg · #10 (**permalink**) 09-01-2005, 10:57 PM

I only cought them on the pro96 not the BC796, but it was the FD was doing the testing, dispatch said it sounded real good. I know the new system will be P25 but I wasn't shure what the PRO96 would show the old system as since it was analog only, or have they done mixed mode for the cut over?

mikey60 · #11 (**permalink**) 09-02-2005, 01:50 AM

I haven't been monitoring it at all to speak of. Were the tests in digital mode?

Mike

seamusg · #12 (**permalink**) 09-02-2005, 10:43 AM

I didn't catch if it was digital. I haven't got a 9600 control channel yet. I left the 796 as it was, but reprogramed the PRO96 for one channel per bank on the PRO96 for Warren. Since the PRO96 is not computer controled, I don't see it in the toolbar on my PC.

seamusg · #13 (**permalink**) 09-15-2005, 11:37 AM

Heard discussion about which PREP someone was using old or new and were having trouble they said they were running on the backup system. Hven't seen any digital yet.

mikey60 · #14 (**permalink**) 09-16-2005, 03:39 PM

9600bps control channel now active on 854.4875

SysID: 19A
WACN: BEE00
Alternates: 853.4875, 855.4875, 856.0875

seamusg · #15 (**permalink**) 09-16-2005, 03:56 PM

Still getting the old CC on 856.0875. Don't see any traffic on the new one yet.

mikey60 · #16 (**permalink**) 09-16-2005, 03:58 PM

Quote:

Originally Posted by seamusg

Still getting the old CC on 856.0875. Don't see any traffic on the new one yet.

Not yet. They only have 7 frequencies to work with at the moment to they have to take them away from the old controller, and add them to the new one as needed. I expected them to use the data option but the control channel isn't advertising that at the moment. I guess they'll probably keep using the configuration they have now for the MDCs then.

Mike

seamusg · #17 (**permalink**) 09-16-2005, 04:10 PM

Warren does have two sites.
Pri 29900 Civic Center - PD station and
back up at 11899 12Mi - Hospital
They said yesterday they were running on backup and the DPW, today, said that they would have to get their radios reprogramed

feta92 · #18 (**permalink**) 09-17-2005, 10:25 PM

Does anyone know if the new Warren system is going to be part of the MPSCS or are they going to be on their own??

seamusg · #19 (**permalink**) 09-17-2005, 10:30 PM

Quote:

Originally Posted by feta92

Does anyone know if the new Warren system is going to be part of the MPSCS or are they going to be on their own??

It's suposed to stay as it was - a stand alone system - just an upgrade to P25

mikey60 · #20 (**permalink**) 09-19-2005, 08:50 AM

I'm seeing radio affiliations this morning. Not too many, just a few. I saw one transmission on TG 100 on Friday. Affiliations I've seen today are on TG 310.

Radio IDs are in the 10108000 range so far today.

Mike