• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Xts2500/5000 mdc

Status
Not open for further replies.

VMaggio1

Member
Joined
Jan 29, 2010
Messages
22
Good Morning,

A friend of mine has an XTS5000 that he had an issue with the programming, so sent it to a friend with depot software and came back with empty codeplug and he has to rebuild it from scratch (which is what he wanted). When he used to transmit on all of his channels it sounded like this: https://www.youtube.com/watch?v=cGyx-hsYeN0&feature=youtu.be

How does he go about putting this back on his radio when he transmits? It is one of the most annoying sounds to hear on the other end of the radio, but it is what he wants. He also has a 2500 he would like to do it with. Any suggestions?


Thank you!
 

KG4INW

Member
Premium Subscriber
Joined
Apr 9, 2009
Messages
1,551
Location
Midlothian, VA
What he said but also make sure you enable preamble as that's what I heard from the video.
 
Status
Not open for further replies.
Top