• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Monitoring EDACS with an MTS2000

Status
Not open for further replies.

jimmie13

Member
Premium Subscriber
Joined
Jul 12, 2013
Messages
131
Location
Lawnside New Jersey
Or, just setup the UniTrunker app to drive a second radio to decode the audio. Works great for me with no issue's with limiting out on the number of TG's to listen to. It also allows priority to work correctly. My setup at home is a MTS2000 and a Uniden 796 as the driven radio. I monitor both a P25 system and a EDACS system with this setup.

can the mts 2000 handle edacs?
 

riveter

Member
Premium Subscriber
Joined
Dec 14, 2008
Messages
1,481
Location
MD
No Motorola radio can track EDACS talkgroups by itself. It's a M/A-COM proprietary technology and not available to Motorola for use. Same as SmartNet/SmartZone going the other way (Moto proprietary, not compatible for M/A-COM gear).
 
Status
Not open for further replies.
Top