Control Channels In Wake Country

[block1955]

I've done some scanning and found quite a bit of control channels. Can anyone shed any light on where they come in or any info on them. I've heard something come in on all of them using the tune mode on my pro96 but when I use them as controls for my trunk id's it doesn't work in Raleigh. When I'm in Fuquay I can hear Raleigh and all my controls clear as day. Once in Raleigh it goes to crap.

866.63125
867.03750
867.04375
867.21250
867.76875
867.16250
868.68125
868.18750
866.03750
866.28750
866.46250
866.62500
866.67500
866.76250
866.96250
867.15000
867.26250
867.37500
867.53750
867.78750
867.96250
868.03750
868.15000
868.20000
868.53750
868.65000
868.78750
866.46250
866.70000
866.96250
867.03750
867.46250
867.76250
868.06250
868.46250

This is how I have it set up in the scanner now

Control 1 867.16250 MOT 0.0 D
Control 2 868.56250 MOT 0.0 D
Control 3 868.93125 MOT 0.0 D
Control 4 867.46250 MOT 0.0 D
Control 5 868.46250 MOT 0.0 D
Control 6 867.80000 MOT 0.0 D
Control 7 866.47500 MOT 0.0 D
Control 8 866.27500 MOT 0.0 D
Control 9 867.54375 MOT 0.0 D
Control 10 868.07500 MOT 0.0 D
Control 11 866.30000 MOT 0.0 D
Control 12 866.68125 MOT 0.0 D
Control 13 866.96875 MOT 0.0 D
Control 14 867.15625 MOT 0.0 D
Control 15 868.27500 MOT 0.0 D
Control 16 866.20000 MOT 0.0 D
Control 17 866.20625 MOT 0.0 D
Control 18 868.65625 MOT 0.0 D
Control 19 866.97500 MOT 0.0 D
Control 20 866.63750 MOT 0.0 D
Control 21 868.20625 MOT 0.0 D
Control 22 868.96875 MOT 0.0 D
Control 23 867.80000 MOT 0.0 D
Control 24 866.53750 MOT 0.0 D
Control 25 866.55000 MOT 0.0 D
Control 26 866.46875 MOT 0.0 D
Control 27 866.68125 MOT 0.0 D
Control 28 868.26250 MOT 0.0 D
Control 29 868.27500 MOT 0.0 D
Control 30 868.97500 MOT 0.0 D
Control 31 866.26250 MOT 0.0 D
Control 32 866.98125 MOT 0.0 D
Control 33 867.55000 MOT 0.0 D
Control 34 867.26875 MOT 0.0 D
Control 35 867.38125 MOT 0.0 D
Control 36 868.21250 MOT 0.0 D
Control 37 866.76875 MOT 0.0 D
Control 38 868.20625 MOT 0.0 D
Control 39 868.05000 MOT 0.0 D
Control 40 866.30000 MOT 0.0 D
Control 41 866.96875 MOT 0.0 D
Control 42 867.27500 MOT 0.0 D
Control 43 866.68750 MOT 0.0 D
Control 44 866.21250 MOT 0.0 D
Control 45 867.43125 MOT 0.0 D
Control 46 866.63125 MOT 0.0 D
Control 47 867.03750 MOT 0.0 D
Control 48 867.04375 MOT 0.0 D
Control 49 867.21250 MOT 0.0 D
Control 50 867.76875 MOT 0.0 D

 

[jthorpe]

I'm completely confused. What kind of scanner do you have and what system are you trying to monitor? I take it you're trying to hear VIPER but I'm not exactly sure what your question is.

 

[KE4ZNR]

block1955-
1st off Welcome to RR.com! Good to have you here. Like jthorpe I am also puzzled about what is the issue here. To be able to monitor Wake County 800Mhz all you have to do is enter 2 frequencies:
--868.7875Mhz Primary Control Channel
--868.5625Mhz Secondary Control Channel
You say you have a Radio Shack Pro 96. With that radio all you have to do is enter the 2 frequencies above to be able to follow the system.
All of the other frequencies you list above are just voice channels.
Marshall KE4ZNR