Dunn Fire/Rescue Tone Outs

Status
Not open for further replies.
Joined
Dec 3, 2007
Messages
53
Location
Dunn
Does anyone have the tone out frequencies currently in use for Dunn?

I know they are broadcast on 154.415 mhz, but would like to know the reed frequencies so I can utilize the tone out feature on my BCD996T.

TIA
 

yardbird

Member
Premium Subscriber
Joined
Mar 3, 2004
Messages
946
Location
Concord, NC
I tried to send you a private message but never got a reply!

Like I said I bought some old Dunn Fire Minitor I pagers a few years ago and I found one and here are the tones that were in the pager.

They may have changed and they may have not.

Tone A 141 339.6 Hz
Tone B 142 358.6 Hz

Give these a try

David
 

conehead

Member
Joined
Feb 13, 2007
Messages
35
Location
NC
I have an old pager I got from surplus. It is a Dunn rescue pager with

A: 145 - 422.1
B: 141 - 339.6

Can you tell me if this it a good tone out.

Thanks,

Cary
 
Joined
Dec 3, 2007
Messages
53
Location
Dunn
1 - Rescue ALL CALL - 154.415mHz - Tone A: 339.6Hz - Tone B: 339.6Hz
2 - Fire Department - 154.415mHz - Tone A: 339.6Hz - Tone B: 358.6Hz
3 - Rescue Team 1 - 154.415mHz - Tone A: 445.7Hz - Tone B: 339.6Hz
4 - Rescue Team 2 - 154.415mHz - Tone A: 358.6Hz - Tone B: 339.6Hz
5 - Rescue Team 3 - 154.415mHz - Tone A: 378.6Hz - Tone B: 339.6Hz
6 - Rescue Team 4 - 154.415mHz - Tone A: 399.8Hz - Tone B: 339.6Hz
7 - Rescue Team 5 - 154.415mHz - Tone A: 422.1Hz - Tone B: 339.6Hz
8 - Rescue Team 6 - 154.415mHz - Tone A: 496.8Hz - Tone B: 339.6Hz
9 - Medic 15 - 154.415mHz - Tone A: 470.5Hz - Tone B: 339.6Hz

Sorry it took so long for me to get back with you. It took me a while to track these down.
 

conehead

Member
Joined
Feb 13, 2007
Messages
35
Location
NC
Harnett EMS Pager Tone Out

Do you have any other fire tone outs or the EMS pager tone outs. I have the old FirstHealth Tone outs but they lost the county.
 
Joined
Dec 3, 2007
Messages
53
Location
Dunn
No. I'll have to speak with someone at the county Communications center to get that info and translate it. What are you doing, building your own pagers?
 

conehead

Member
Joined
Feb 13, 2007
Messages
35
Location
NC
I travel a lot from Harnett west to Orange and south the Shaw, SC back to Hoke. I have three Spectra 128 channel radios and three portables that I use as scanners and pagers. I don’t like to here open channel like scanners have.

Thanks


StitchMagician said:
No. I'll have to speak with someone at the county Communications center to get that info and translate it. What are you doing, building your own pagers?
 
Status
Not open for further replies.
Top