Washington Court House/Fayette county

dalan57 · #1 (**permalink**) 08-12-2011, 2:05 PM

anyone know of why the city of washington court house is quiet now...sometimes i see a talk group ID come up but no sound..scanner works OK on other counties

radioscan · #2 (**permalink**) 08-12-2011, 10:01 PM

Could be WS Electronics has finalized rebanding of the system and have removed the old frequencies Try this LCN order, if it doesn't work play around with the LCN order and see if you can discover the new alignment.

Code:

LCN 01        851.20000     
LCN 02        851.75000 
LCN 03        852.45000
LCN 04        853.13750
LCN 05        853.68750

sadman3 · #3 (**permalink**) 08-12-2011, 11:12 PM

with that LCN order do we need old channels like pickaway county old and new or just the new ones for fayette county

radioscan · #4 (**permalink**) 08-13-2011, 7:34 AM

This is about the Fayette County system not Pickaway County.

sadman3 · #5 (**permalink**) 08-13-2011, 11:03 PM

sorry may have worded that wroung fayette county has 10 frequency in the DB do we need all 10 programed in or just the 5 new ones

radioscan · #6 (**permalink**) 08-14-2011, 8:42 AM

The old (pre-rebanding) frequencies (above 854 MHz) will need to be removed at some point to finalize the rebanding of the system. If the listed LCN no longer tracks the system then the first thing to try is loading in only the NEW frequencies, as listed above. This is the same pattern WS Electronics has followed in the rebanding of Clinton County and most recently the City of Springfield EDACS systems.

dalan57 · #7 (**permalink**) 08-17-2011, 11:21 AM

The new LCN works for me..entered in the new ones and locked out the old..fine job!
Thanks

radioscan · #8 (**permalink**) 08-17-2011, 11:29 PM

We need to know the data channels. If anyone can listen for a few days and post what they are we can make the changes to the database.