OPP

oldsailor56 · #1 (**permalink**) 02-06-2013, 10:29 PM

I'm only hearing the OPP in my area on 413.5375, beat 01.....did they change or did I miss something here. I'm in Essex County, Kingsville. I reloaded bell fleetnet with freescan, and still not hearing them on the normal channel.

VE3JSO · #2 (**permalink**) 02-07-2013, 12:04 AM

the lambton tower seems ok from what i am seeing on trunk 88

randyf · #3 (**permalink**) 02-07-2013, 6:42 AM

did you review your lock outs , and check to make sure no sites are locked out

papillon · #4 (**permalink**) 02-07-2013, 10:50 AM

Chatham, Essex and Windsor towers all strong signals into East Windsor

oldsailor56 · #5 (**permalink**) 02-07-2013, 2:13 PM

Made sure all unlocked, must just be me?

randyf · #6 (**permalink**) 02-07-2013, 5:35 PM

do a search in the 140.000 to 145.000 range to see if you can hit any control channels

oldsailor56 · #7 (**permalink**) 02-07-2013, 11:15 PM

142.90500c has a continuous noise on my end.

davidmc36 · #8 (**permalink**) 02-08-2013, 5:51 AM

Which is CC for Essex. If your system programming is good you should be able to track it.

papillon · #9 (**permalink**) 02-08-2013, 10:14 AM

Sounds like the bandplan is off. There's a sticky somewhere on this board from Forts on how to pgm the 396/996 xlt.

oldsailor56 · #10 (**permalink**) 02-08-2013, 2:48 PM

Bandplan upper was missing, hope that fixed it, we'll see shortly.

Forts · #11 (**permalink**) 02-09-2013, 9:40 PM

Get it going??

oldsailor56 · #12 (**permalink**) 02-09-2013, 11:14 PM

Finally it came back, think it was something on the towers end, even after I reloaded everything it still was not working, then last night, back to normal.