Channel 0x32 = 50 is a repeater input channel (range 0-379) which
with a base of 138.015, corresponds to 138.755, most likely input to
142.785 (an existing VC). Your interpretation of the mapping is
incorrect.
If you run an old Trunker version prior to Eric Cottrell's modified
version, it cannot be set up to correctly handle VHF/UHF systems.
Input and output channel numbers are displayed. "Tr383 beta ec1"
only displays output channel numbers and requires correct setup
to correctly display frequencies (map file).
TRUNK88 and UniTrunker are more up to date, but also require
correct setup to show correct frequencies.
Dave
|