bonez01
Member
Radio Shack Pro-197 & Laird B8065 800 Mhz antenna
08 Hummer H2 install
- Thread starter bonez01
- Start date
- Status
OsloViking1975
Member
Nice install looks like it was meant to be there.
b7spectra
EMS Dispatcher
Where on the Hummer is the antenna?
Looks more like an H3 to me (My wife has one).
And the antenna is mounted on the drivers side of the hood, just forward of the raised part in front of the windsheild.
None the less, install looks good! A low pro NMO MLPV (or whatever) woulda blended into the roof, but still a very clean install.
RIch
And the antenna is mounted on the drivers side of the hood, just forward of the raised part in front of the windsheild.
None the less, install looks good! A low pro NMO MLPV (or whatever) woulda blended into the roof, but still a very clean install.
RIch
bonez01
Member
It is on the driver side hood. Here is a pic
KM4WLV
Member
Looks good !!! You don't see to many Hummer installs.
Michael-SATX
Member
You should turn off "Global Attenuate" setting on the Pro-197
Hey Bonez01, nice setup !
PS~ I was lQQking at your Pro-107's display and noticed the Capital "G"
meaning that the "Global Attenuate" is still set on as the factory sets it
for whatever reason they we need 20db of attenuation globally turned on ?
Most folks would simply turn off Global Attn by pressing "Func" + "ATT" keys !
Sooo later on, if and ONLY if you have a bothersome frequency programmed in
THEN you could flip on "ATT/Attenuate" for JUST THAT frequency ~ how's that
One frequency that is a particular problem on most of my scanners and falsely opens
up is 243.000 AM Air Emergency UHF ~ so I edit that object to have just it's ATT on.
Therefore this channel behaves itself, besides I hope by having the VHF 121.500 AM
Air Emergency also programmed in will do the trick the few times I ever heard it, etc.
Hey Bonez01, nice setup !
PS~ I was lQQking at your Pro-107's display and noticed the Capital "G"
meaning that the "Global Attenuate" is still set on as the factory sets it
for whatever reason they we need 20db of attenuation globally turned on ?
Most folks would simply turn off Global Attn by pressing "Func" + "ATT" keys !
Sooo later on, if and ONLY if you have a bothersome frequency programmed in
THEN you could flip on "ATT/Attenuate" for JUST THAT frequency ~ how's that
One frequency that is a particular problem on most of my scanners and falsely opens
up is 243.000 AM Air Emergency UHF ~ so I edit that object to have just it's ATT on.
Therefore this channel behaves itself, besides I hope by having the VHF 121.500 AM
Air Emergency also programmed in will do the trick the few times I ever heard it, etc.
bonez01
Member
Thanks Michael-SATX for the info.
tunnelmot it is an H3 typo on post thanks
Have a great day everyone
Thanks for the kind words
tunnelmot it is an H3 typo on post thanks
Have a great day everyone
Thanks for the kind words
n5oya
Member
antenna
why dont you just use your stereo antenna...thats what i do and works perfect. just use a y connector and put proper connectors on it. Plus, doesn't show additional antenna.
why dont you just use your stereo antenna...thats what i do and works perfect. just use a y connector and put proper connectors on it. Plus, doesn't show additional antenna.
liftedtacoma4x
Member
Wirelessly posted (Mozilla/5.0 (Linux; U; Android 2.2; en-us; DROID2 GLOBAL Build/S273) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1)
Can't see is the link bad?
Can't see is the link bad?
Considering this thread was started 9/2010 yea the link is dead.
so where are the pics.I only get porno
bonez01
Member
I'll re upload some this afternoon
bonez01
Member
that's better.looks good
- Status
Similar threads
- Locked
