Pro-106 discriminator tap

HogDriver · #1 (**permalink**) 12-02-2012, 11:25 AM

I've heard that the PC jack on the radio can be used as a discriminator tap. So if I have software to "decipher" EDACS, can i plug in the programming cable to a laptop and decode it?

RonnieUSA · #2 (**permalink**) 12-02-2012, 11:31 AM

Quote:

Originally Posted by HogDriver

I've heard that the PC jack on the radio can be used as a discriminator tap. So if I have software to "decipher" EDACS, can i plug in the programming cable to a laptop and decode it?

The 106 does EDACS, no tap needed.

HogDriver · #3 (**permalink**) 12-02-2012, 11:33 AM

Sorry. Our EDACS uses ProVoice. I didn't tell you that.

RonnieUSA · #4 (**permalink**) 12-02-2012, 11:42 AM

Quote:

Originally Posted by HogDriver

Sorry. Our EDACS uses ProVoice. I didn't tell you that.

Here yea go>>> Discriminator Tap PRO106-Pics Included

Michael-SATX · #5 (**permalink**) 12-02-2012, 12:06 PM

If one were in No-Voice, oops I mean EDACS Pro-Voice land like some of us folks are ,
I would think the driver of a Pro-106 could go "Hogwild" getting to listen to EDACS Pro-Voice !
LQQk up in the RR Wiki how to use the Unitrunker and DSD ( Digital Speach Decoding ) software.
In Unitrunker it's GREat to have 2 scanners, 1 for "Inline" mode and 1 for "control" mode operation.

Yee Haa ~ Happy Drive'n

gr8rcall · #6 (**permalink**) 12-02-2012, 4:42 PM

The pro-106 jack works for Unitrunker. But I believe that you HAVE to tap it to use DSD!

fourthhorseman · #7 (**permalink**) 12-02-2012, 4:51 PM

Yes,,a tap is indeed needed for the 106 to feed DSD.

the pre filtered audio is piped into the soundcard.,and the levels
can be adjusted from there to get a good signal..