BCT15 Help

Having issues with the scanner getting hung up on audio with static while trunking. Sounds like an open repeater. Only does it on certain trunking channels. I tried squelch and moving antenna. It's a pain when running a live feed and it gets stuck on a trunking ID

Make sure you have "End Code" set.

Set End Code (Motorola only) sets how the scanner handles the transmission end code sent by most Motorola systems. The default setting is Yes.
Scroll to 'Set End Code' and press E/.
Scroll to one of two settings and press E/ to save and exit.
Yes- the scanner immediately returns to the control channel when it detects the end code.
Ignore- the scanner does not return to the control channel until the carrier drops.

If the above doesn't help program the control channels only (if the problem is occurring on other than CC frequencies).

Courtesy of Easier to Read BCT-15 Scanner Manual end code