I have a few DMR systems in my area what do I need to get the setup or items to monitor? I have a desktop I'm about to put windows xp SP3 on it with a week or so. I have another computer has win7 64bit. Thanks.
Download DSD+ decoderI have a few DMR systems in my area what do I need to get the setup or items to monitor? I have a desktop I'm about to put windows xp SP3 on it with a week or so. I have another computer has win7 64bit. Thanks.
As Steve (above) says, get DSD+. You list the PSR-800 as one of your scanners, so you can use the IF output for the discriminator audio and run to your line-in on audio card on computer.
I have a quite a bit of NXDN here in Los Angeles. Run my WS-1080 IF out to headphone jack, plug into line-in on Windows 7 computer, turn on DSD+, and works very well. Just set up a scan list with all your DMR stations (don't think will work with trunking, so enter as conventional), put into some scan list on PSR-800, and you should be good to go. Good luck.
Steve AA6IO
What do you mean it went nuts, are you seeing talkgroups coming up and radio Ids, if so then just put all the frequencies for the system in one group and scan them.Do I need to lock out the Control Channel? The screen went nuts when it found the CC.
I did a test on the local p25 uhf comes in clear and worked. I guess I'm too far to hear the DMR system I'm trying
This is what I see on my connect plus system. I'm sitting on the control channel with a very strong signal.
Steve
Try doing a search for some more digital systems, in my area I leave DSD+ on and set my scanner to do a search between 400 MHz and 430 MHz and see if DSD+ starts decoding, I also do searches between other bands with DSD+ and find other frequencies.
Steve
Saint
Greetings. How did you get the three other windows in DSD+ to show? I only get the usual scrolling window
vince48
Saint
Greetings. How did you get the three other windows in DSD+ to show? I only get the usual scrolling window
vince48
What I see for the Power Company is Con+ NID:164 Site:11 NL:10 12 26. I'm not sure what Con+ NID: NL: stand for.
The other searches from vhf to uhf and 800mhz it came up P25 Pl and Provoice
Con+=Connect Plus (Motorola dedicated control channel DMR trunking system)
NID=Network ID (like a System ID in trunking)
NL=Neighbor List