Pro-106: manual programming

Status
Not open for further replies.

rrengineer

Member
Joined
Nov 18, 2005
Messages
42
Location
Hartwell Georgia
I have been on before about my pro-106 manual programming, I have used a lot of instructions as to this however I am still having a problem entering the talk groups it keeps going to wildcard and if I enter something for another scanlist somehow it goes to scan list 1 which I know is default. I save save save what am I doing wrong. does anyone have a 123-step I can understand to do this thanks
 
R

retiredmich

Guest
I have found that if i turn off the scan list's other than the 1 i want to program that helps. Then go back & turn on the 1's i turned off. Did you do this ( se below)

1 hit pgm / 2 f1 new / 3 f1 tgrp / 4 scan lists, push sel to put a star at # 01,
5 TSYS= what dept , 6 ID = wild card/ what dept TG ID #, 7 tag = put a name of that dept, 8 lock out = off
then scroll down to -menu end- & hit save
 
Last edited:
Status
Not open for further replies.
Top