OBT bandplan info for the GATRRS

Does anyone have the OBT/Band plan table for the GATRRS available, including the 150mhz and 700mhz channels? I am not finding it anywhere on RR or elsewhere. I am not in range of the system to monitor a CC, or I would get them myself. Any help would be greatly appreciated.

From one of the Western Counties VHF sites - about 6 months old;

139.8625 02-0000 02-4095 2.5
150.1000 03-0000 03-4095 2.5
160.3375 04-0000 04-4095 2.5
762.00625 01-0000 01-4095 6.25
851.00625 00-0000 00-4095 6.25

Copy. Thanks!

Thank you very much!!

GATRRS Rebanding

Did the band plan
139.8625 02-0000 02-4095 2.5
150.1000 03-0000 03-4095 2.5
160.3375 04-0000 04-4095 2.5
762.00625 01-0000 01-4095 6.25
851.00625 00-0000 00-4095 6.25
Work?

I've been having problems for some time now. Everything was working then I lost APD completely and with my new scanner, BCD996P2, I've lost TCSO also. The band plan that I have in it is
Uniden 800mhz Rebanding Table Band Plan Base Freq (lower) Base Freq (upper) Offset Polarity Spacing
1 851.025 854.000 440 + 25 khz
2 851.0125 868.9875 0 + 25 kHz

I'm getting nothing. I can see the signal, full scale, but I'm decoding nothing. Can you help me out or is there someone else on the forum that can give me a hand. Thanks.

The rebanding table you loaded is for smartnet/smartzone systems.

P25 band plans are broadcast in the control channel data and should load into modern scanners automatically.

So I shouldn't load any band plan even with the rebanding?

n6szc said:

So I shouldn't load any band plan even with the rebanding?

Click to expand...

For GATRRS, and for other P25, Phase I or Phase II systems, entering the band plan is not necessary. The needed information is, as noted above, provided in the control channel data and will populate the tables automatically.

Thank you. I made the corrections and all is well. All the bandplan info on RR screwed me up. Even the scanner manual wasn't very clear. But all is well. Thanks again.