BM82557
Member
It was released on 5/14 - DSDPlus | Digital Decoder
really basic question:
DSD+ supports P25 X2. Is that the same as p25 phase2?
really basic question:
DSD+ supports P25 X2. Is that the same as p25 phase2?
To answer both of the above questions, it should work with any receiver that can have baseband/discriminator audio piped from it to the software. This means a dongle, Airspy, Funcube, etc. using either VBAudio Cable or Virtual Audio Cable software. It also will work with a tapped scanner. I use it with my BC898T scanner, for example.
The FMP softare for scanning however will only at this time work with the RTL dongle, unless something has changed that I've missed. For the Airspy SDR# would be the likely choice. The scanner of course scans on its own and no need for any other software is required.
Another really basic question. I have not used the DSDPlus 1.07 versions yet. Are you all using some dongle like RTL or AirSpy and an intermediate program like SDRSharp. What do you need in terms of a basic set up to use DSDPlus 1.07 versions. Will a tapped scanner do. Is this similar to previous DSDPlus versions in terms of basic set-up needed. Thanks for any responses.