Muxlow
Super Secret
Got one of these Macom tagged P7100ip P25 vhf radios off the ever fun ebay
Using R09B11 RPM i cant get the radio to read. Even tried Programmer ver 20 with no go
Im able to program the 800mhz P7100ip's but this one just wont work for me. I push and hold the buttons on the side and the screen goes all pixels. When i click read or write the screen shuts off and says the radio is not connected.
Tried just reading the radio with the radio on, No go. Tried holding only the ptt on power up and the screen goes blank
What the hell is the issue here?
Flash J2R03C01
DSP F4R03A03
Pers 29.0
Iv got a wack load of LPE/MRK/Jag 700P/P7100's and no issues doing these and now this VHF radio wants to go dumb
Just removed the guts and put a different case on it from a working P7100ip and get the same stuff going on. Screen goes blank when read/write
Using R09B11 RPM i cant get the radio to read. Even tried Programmer ver 20 with no go
Im able to program the 800mhz P7100ip's but this one just wont work for me. I push and hold the buttons on the side and the screen goes all pixels. When i click read or write the screen shuts off and says the radio is not connected.
Tried just reading the radio with the radio on, No go. Tried holding only the ptt on power up and the screen goes blank
What the hell is the issue here?
Flash J2R03C01
DSP F4R03A03
Pers 29.0
Iv got a wack load of LPE/MRK/Jag 700P/P7100's and no issues doing these and now this VHF radio wants to go dumb
Just removed the guts and put a different case on it from a working P7100ip and get the same stuff going on. Screen goes blank when read/write
Last edited: