Any idea why Sentinel for the x36HP models is not importing the DMR Tier 3 system linked below?
When this system was first added to the database, it had no talkgroups listed yet and I'm pretty sure Sentinel will not import those.
But... about 02/13/2017, a TG was added but the system is still not showing up in Sentinel with the latest database pulled on 02/19/2017.
I know the x36HP models will receive DMR Tier III systems as they show DT3 in the radio's display when scanning or searching a Tier III site.
I'm also listening to the site below and my 436 and 536HP models are hearing it just fine. I had to manually enter the sites info of course as it does not appear in Sentinel.
So, just wondering why this system in not being imported into Sentinel with the latest DB pull?
Perhaps Sentinel is not recognizing Tier III systems as valid systems so it skips them when the DB pulls are done on Sunday night.
NXDN systems are skipped because none of Uniden's models support NXDN yet. That makes sense but DMR Tier III systems should now be available in Sentinel as that is a supported system type.
Here's the link to the system that is not appearing in Sentinel: Warner Communications (DMR 13) Trunking System, St Louis Metro, Multi-State - Scanner Frequencies
I've not checked any other Tier III sites in other states and seen if they are available in Sentinel or not.
Another thing I think would help with the RR database being updated is to allow Sentinel to pull in supported trunked systems even if there are no listed talkgroups yet. A dummy talkgroup could be created automatically by Sentinel and Sentinel could set the system to Search mode so users can watch for new talkgroups on the systems that don't have talkgroups listed yet.
This would at least allow users to get new systems into their radios via Sentinel if they are not good at manually adding a system or simply don't know how to add a new system manually.
I just thought this would be a good idea and could also help new systems get updated with newly discovered talkgroup info. More users may monitor these new systems if they see one available in Sentinel but if not available, many may not bother adding a system manually.
I don't know how hard it would be to add this into Sentinel as Sentinel would need to know the TG format for valid system types so it could create the dummy talkgroup.
I'm pretty sure Sentinel can set a trunked system to Search or Scan mode but in this case, Search mode would be what is needed so the radio displays new talkgroups as they come on the air.
Just an idea.
When this system was first added to the database, it had no talkgroups listed yet and I'm pretty sure Sentinel will not import those.
But... about 02/13/2017, a TG was added but the system is still not showing up in Sentinel with the latest database pulled on 02/19/2017.
I know the x36HP models will receive DMR Tier III systems as they show DT3 in the radio's display when scanning or searching a Tier III site.
I'm also listening to the site below and my 436 and 536HP models are hearing it just fine. I had to manually enter the sites info of course as it does not appear in Sentinel.
So, just wondering why this system in not being imported into Sentinel with the latest DB pull?
Perhaps Sentinel is not recognizing Tier III systems as valid systems so it skips them when the DB pulls are done on Sunday night.
NXDN systems are skipped because none of Uniden's models support NXDN yet. That makes sense but DMR Tier III systems should now be available in Sentinel as that is a supported system type.
Here's the link to the system that is not appearing in Sentinel: Warner Communications (DMR 13) Trunking System, St Louis Metro, Multi-State - Scanner Frequencies
I've not checked any other Tier III sites in other states and seen if they are available in Sentinel or not.
Another thing I think would help with the RR database being updated is to allow Sentinel to pull in supported trunked systems even if there are no listed talkgroups yet. A dummy talkgroup could be created automatically by Sentinel and Sentinel could set the system to Search mode so users can watch for new talkgroups on the systems that don't have talkgroups listed yet.
This would at least allow users to get new systems into their radios via Sentinel if they are not good at manually adding a system or simply don't know how to add a new system manually.
I just thought this would be a good idea and could also help new systems get updated with newly discovered talkgroup info. More users may monitor these new systems if they see one available in Sentinel but if not available, many may not bother adding a system manually.
I don't know how hard it would be to add this into Sentinel as Sentinel would need to know the TG format for valid system types so it could create the dummy talkgroup.
I'm pretty sure Sentinel can set a trunked system to Search or Scan mode but in this case, Search mode would be what is needed so the radio displays new talkgroups as they come on the air.
Just an idea.