My WS1095 went deaf

Status
Not open for further replies.

N4OGL

Member
Premium Subscriber
Joined
Apr 10, 2003
Messages
69
Location
Sioux Falls, SD
Well, not completely. On a variety of antennas, and with no change in programming, it seems to have gone deaf on low-band VHF (California Highway Patrol frequencies). I've reprogrammed the SD Card, reset the radio (using every available method I could locate), and swapped a bunch of different antennas in and out. It *is* up to date on firmware and DSP and everything else, per EZ Scan.

Any suggestions from the crowd, or is it time to yank it from the car and send it off to Whistler? Any "hidden menus" I should explore?
 

dhalbasch

Member
Premium Subscriber
Joined
Apr 22, 2004
Messages
78
Location
Antioch, California
Mine did the same several months ago. I was working with tech support while I was off recovering from surgery. While I was doing this I went back to work and haven't had time to follow up on it. I'd email whistler tech support and get a dialog going with them, they should be aware of it due to my experience and you would be backing it up.

Dennis

P.S. It was the CHP also I stopped receiving, SF Bay Area
 
Status
Not open for further replies.
Top