I just got a almost new 106 just mint perfect here in Boise for $115 tonite with both battery holders, wall charger, manual.
Only issue is heap error locking it up
Only issue is heap error locking it up
Pro-106 Heap Error
- Thread starter safetypro79
- Start date
- Status
Very easy fix.
ka3jjz
Wiki Admin Emeritus
which is described in detail in our FAQ
GRE/RS Object Oriented Scanners FAQ - The RadioReference Wiki
Mike
marksmith
Member
The heap error just means that a talkgroup has been entered that is not associated to a system.
Deleting that talkgroup, or just resetting and clearing all programming will fix that.
Mark
536/436/ws1095/996p2/996xt/325p2/396xt/psr800/396t/HP-1/HP-2 & others
Deleting that talkgroup, or just resetting and clearing all programming will fix that.
Mark
536/436/ws1095/996p2/996xt/325p2/396xt/psr800/396t/HP-1/HP-2 & others
Fixed now
Thanks team !
I finally got it
always pays to read the manual quite thoroughly
Thanks team !
I finally got it
always pays to read the manual quite thoroughly
Tricks
I know this is rather odd, but I always assign "01" to all loaded talk groups to avoid this. I never use 01 unless I have mapped a new system wrong or missed one entirely.
If you have Win500, you can look at "all objects" to see if they are any detached talk groups.
I know this is rather odd, but I always assign "01" to all loaded talk groups to avoid this. I never use 01 unless I have mapped a new system wrong or missed one entirely.
If you have Win500, you can look at "all objects" to see if they are any detached talk groups.
Search window. It's pretty easy.
I knew the answer. Wasn't asking for me. I was wondering what the OP thought.
Heap error again
I am getting the heap error and am trying to download from scanner
which win500 says "timed out"
the scanner is still receiving my local p25 system fine any way I can reset without doing a factory reset deleting all data?
Thanks
I am getting the heap error and am trying to download from scanner
which win500 says "timed out"
the scanner is still receiving my local p25 system fine any way I can reset without doing a factory reset deleting all data?
Thanks
ka3jjz
Wiki Admin Emeritus
If you are getting a heap error, it basically means that you have one or more TGRPs that aren't associated with a TSYS
Section 4 of the wiki page describes this...
GRE/RS Object Oriented Scanners FAQ - The RadioReference Wiki
Just read this and this thread and you will have it in no time...Mike
Section 4 of the wiki page describes this...
GRE/RS Object Oriented Scanners FAQ - The RadioReference Wiki
Just read this and this thread and you will have it in no time...Mike
I don't want to insult anyone; just trying to help. Can I ask what type of a system you are programming that gets the heap error?
Check this link for resets:
https://forums.radioreference.com/radio-shack-scanners/202740-pro-106-reset-factory-default.html
Thanks Mike .... but
When pressing any key the scanner shows heap full 0C6EF8: 84
however as mentioned the scanner is working when turned on without touching a keys
When pressing any key the scanner shows heap full 0C6EF8: 84
however as mentioned the scanner is working when turned on without touching a keys
Thanks just reaet
Did a full reset
Fortunately only two counties other than manually re entering TG's and CONV info
All is well
Thanks
Did a full reset
Fortunately only two counties other than manually re entering TG's and CONV info
All is well
Thanks
- Status
Similar threads
BCD436HP/BCD536HP:
BCD436HD issue: 1 of 3 batteries die overnight, even powered off!
