Montco trunking east system

AGRadioNut47 · Oct 7, 2017

I am wondering on the current montco trunking system.If there is a way that I can just scan the east system aka i live in east) all the fire region channel? What best freq is it on 800 mhz. On my scanner i have both east and west systems but they jump around with i scan them.

scan-pa · Oct 7, 2017

What scanner are you using?

Sent from my SM-G935V using Tapatalk

AGRadioNut47 · Oct 7, 2017

Bcd996p2 scanner

scan-pa · Oct 7, 2017

Disable the west site. and only scan the East site system.

AGRadioNut47 · Oct 7, 2017

I did disable the west system but it only pick up fire regions 4,5,6 it is not picking up regions 1,2,3 inless i put the west and east.

scan-pa · Oct 7, 2017

Correct, east regions are on the east site system, and the west regions are on the west site systems, and the the countywide tg are on both sites.

Sent from my SM-G935V using Tapatalk

AGRadioNut47 · Oct 7, 2017

Ok there is one freq on trunking system is 852.6500 that does both but its not stong signal on my scanner it two bars it that both east west site?

Whiskey3JMC · Oct 8, 2017

AGRadioNut47 said:
Ok there is one freq on trunking system is 852.6500 that does both but its not stong signal on my scanner it two bars it that both east west site?

852.650 is a control channel on the west site. There are some talkgroups which are simulcast on both sites: Countywide, EMS & Fire Region 4 are among the few. Perhaps you are hearing one of these talkgroups?

Montco trunking east system

AGRadioNut47

Member

scan-pa

RRDB Admin

AGRadioNut47

Member

scan-pa

RRDB Admin

AGRadioNut47

Member

scan-pa

RRDB Admin

AGRadioNut47

Member

Whiskey3JMC

DXpeditioner

Similar threads