BCDx36HP Update 1.17.00

UPMan · Apr 27, 2018

1.17.00 Release Notes (04/27/2018)

Modified the method for detecting the NXDN type
Modified receive operation for NXDN DFA systems
Modified receive operation for IDAS Trunked systems
Accepted the updating of NXDN Alias data
Improved trunk tracking for DMR RAS systems
Changed the LCN finder operation for CAP+ systems
Modified recording operation for encrypted audio during conventional scanning
Fixed an issue that caused noise over Wi-Fi.

Sanscanman · Apr 27, 2018

thank you, Paul,

I was just about to ask why I had a 1.17 FW when I went to update the 3 just now.

werinshades · Apr 27, 2018

UPMan said:
1.17.00 Release Notes (04/27/2018)

Accepted the updating of NXDN Alias data

Firmware Friday continues! Can you elaborate on this?

jonwienke · Apr 27, 2018

This update does not fix the Close Call recording issue.

garys · Apr 27, 2018

Just keeps getting better and better. Thanks.

scan-pa · Apr 27, 2018

Thank you Paul and Uniden... love seeing fw updates. The fw should be tweaked weekly with weekly fw updates....

Sent from my SM-G935V using Tapatalk

celbaseman · Apr 27, 2018

Is there any place where I can get the bin file for 1.17.00 for my 436 and 536? My work blocks Sentinel from doing updates.

LEH · Apr 27, 2018

From the looks of the 'fixes', if you have an x36 scanner without the DMR or NXDN upgrades you could probably skip the download.

As an old(er) acquisition type, this is why we had IOT&E (Initial Operational Test & Evaluation). To try and get the bugs worked out before things hit the field. Even then the first year or so after a major upgrade, we'd be putting out dozens of fixes for issues testing just doesn't think about.

mikepdx · Apr 27, 2018

BCDx36HP Update 1.17.00

Thanks again Paul...

tampatracker · Apr 27, 2018

Thanks for the updates UPMan, you guys are making the engineers earn their money. And it's great to see that you're back in the saddle again, I've been following you're blog and am glad to see you're back at the helm again and wish you a continued speedy recovery. John.

UPMan · Apr 27, 2018

werinshades said:
Firmware Friday continues! Can you elaborate on this?

Alias decoding is not only at the beginning of a voice transmission, but also while receiving voice data.

Even if it misses the beginning Alias, after that, can update it.
However, updating of the data is slow.

jonwienke · Apr 27, 2018

No joy on running LCN Finder on Cap+ DMR with RAS. Franklin County Jail got nothing even after several voice transmissions.

UPMan · Apr 27, 2018

jonwienke said:
This update does not fix the Close Call recording issue.

Neither I nor engineering can duplicate this. What I did:

1) Start a recording session while scanning.
2) Turn on Close Call DND.
3) Key up a transmitter and start counting to ten when the hit is caught, then unkey.
4) Stop recording session.
5) Replay recording session.

Nothing was missed in the recording.

mrscanner2008 · Apr 27, 2018

same thing here
No joy on running LCN Finder on Cap MAX (TIII) , got nothing even after several voice transmissions. DSD+2.98 follow correctly.

Go-West · Apr 27, 2018

Thanks, UPMan for another update.

kh6sz · Apr 27, 2018

I love these Firmware Fridays!

jonwienke · Apr 27, 2018

UPMan said:
Neither I nor engineering can duplicate this. What I did:

1) Start a recording session while scanning.
2) Turn on Close Call DND.
3) Key up a transmitter and start counting to ten when the hit is caught, then unkey.
4) Stop recording session.
5) Replay recording session.

Nothing was missed in the recording.

The issue is when I'm trying to record with ProScan. The audio data is streamed normally, but recording doesn't start in ProScan until about 5 seconds into the transmission.

Here's a video:
https://1drv.ms/v/s!ApJIS-l4xqPtgvFA6a4P423fm4GjjA

I don't know if this is a ProScan issue or a firmware issue. But it's an issue.

UPMan · Apr 27, 2018

If the audio is streamed normally, this sounds like a ProScan issue. We'll stop chasing that gremlin.

werinshades · Apr 27, 2018

UPMan said:
Alias decoding is not only at the beginning of a voice transmission, but also while receiving voice data.

Even if it misses the beginning Alias, after that, can update it.
However, updating of the data is slow.

Thanks, will keep an eye on it. Save Unit ID is still required, so must be fast fingered...lol! One thing must be said about this new feature, it's System Programmer dependent. Not all Unit ID's are assigned Alias ID's so your results may vary depending on the system you're monitoring.

soberone14 · Apr 27, 2018

Does this mean sentinal will program NXDN now?

BCDx36HP Update 1.17.00

In Memoriam

N5WRF

Member

More Info Coming Soon!

Member

RRDB Admin

Member

Member

Member

Member

In Memoriam

More Info Coming Soon!

In Memoriam

Member

Member

Member

More Info Coming Soon!

In Memoriam

Member

Member

Similar threads