All Band Fire Stik Antenna Mount?

shajoe44 · May 25, 2018

I have a 4 ft all band Fire Stik Antenna. I am looking for a mount with the proper coax to try with my scanner. I need a male BNC connector. I'm just trying to experiment with the reception compared to the other all band antenna i am using now. Thanks.

Blackswan73 · May 26, 2018

Use standard rg8x or RG58 and use PL259 connectors. Then use a short say 2’ LMR400 jumper with the Pl259 or SO239 on one end Ann BNC on the other end

Blackswan73 · May 26, 2018

I use the same setup on my Cherokee

mule1075 · May 26, 2018

http://www.firestik.com

Have a large selection of different mounts.

majoco · May 26, 2018

So which antenna have you really got. There's lots of Firestik antennas that are 4ft long including CB, 10metres and 2metres - none of which seem to be called 'all band' - and they all fit the standard Firestick mount 3/8" 24tpi base which I suspect will have a so259 female on the other side.

KevinC · May 26, 2018

majoco said:
So which antenna have you really got. There's lots of Firestik antennas that are 4ft long including CB, 10metres and 2metres - none of which seem to be called 'all band' - and they all fit the standard Firestick mount 3/8" 24tpi base which I suspect will have a so259 female on the other side.

I'm guessing this one...

MOBILE SCANNER ANTENNAS

Blackswan73 · May 26, 2018

Scanner antenna. They make a 3’ and 4’ version. I have the 4’ one and it works great

shajoe44 · May 26, 2018

Thanks for all the info I have the 4ft-MSM-4

All Band Fire Stik Antenna Mount?

shajoe44

Member

Blackswan73

Active Member

Blackswan73

Active Member

mule1075

Member

majoco

Stirrer

KevinC

Other

Blackswan73

Active Member

shajoe44

Member

Similar threads