Garmin GPS 18x PC and SDS100

I currently use this GPS with my 436:

https://www.amazon.com/Garmin-18x-GPS-Navigator-Unit/dp/B0016NYHVS

Will my Garmin puck work with the SDS100, provided that I use this cable to connect from the GPS to the scanner:

https://www.uniden.com/shop/communication/gps-usb-cable/

Or do I need to purchase the Uniden BC-GPSK puck?

Thanks.
Scott

The Uniden puck has a 6-pin DIN connector. Your puck has a DB9. You will need to find an adapter, or cut the plugs off and wire them directly together.

jonwienke said:

The Uniden puck has a 6-pin DIN connector. Your puck has a DB9. You will need to find an adapter, or cut the plugs off and wire them directly together.

Click to expand...

So, what would that cable diagram look like? I need a DB9 to USB Micro?


Thanks,
Russell

I spent some time and never found anything (nor anything in my junk box that worked either) - ended up adding a Uniden GPS.


Goal would be one for the 2 scanners, SDS (USB Micro) and one for 436/HP series.

May be going way out there, but I have the garmin gpx 18c Pc and had the db9 adapter cable to the port required for the 436. I have since gotten the pinout from Garmin for the gpx 18x Pc. If for example i had an extra power cable just like the one that powers the SDS100 and i cut the regular usb off the end and use the cable inside to match up with the db9, which only uses 3 pin, does anyone think that would work on the sds100?