Ok how do I program the xpt for the DMR system ?
ok thanks.
ok thanks.
xpt
- Thread starter AC0RV
- Start date
- Status
While in Cape Girardeau, mo Today. Was searching for some Cape Girardeau area radio traffic that had the xpt on the bottom right of the 436hp I was using.
Was wondering on now to program it into the scanner. I think is a DMR protocol.
Was wondering on now to program it into the scanner. I think is a DMR protocol.
davidzimmerman
Member
at one 1 time people use to GOOGLE for info i still do did you try to Google the 436HP for the Manual??
Would not be in the manual as it was printed before the DMR Upgrade.
davidzimmerman
Member
i would think a up date was done to DMR Programming by now.
Not really. The online easier to read manual was updated. But I see nothing about the OP's question.
davidzimmerman
Member
hope someone can give him help
It's a Hytera flavor of DMR. No control channel, so probably program it as One Frequency Trunked. (You can still program multiple frequencies per site.)
https://www.hytera.us/systems/xpt-digital-trunking
https://www.hytera.us/systems/xpt-digital-trunking
- Joined
- Aug 1, 2011
- Messages
- 893
You can scan DMR XPT when programed conventionally to see if it is worth programing as a trunking system since there is no control channel to hang-up the scan.
If you do not get any voice from using a One-Frequency Trunk try DMR Moto TRBO Trunk.
If you do not get any voice from using a One-Frequency Trunk try DMR Moto TRBO Trunk.
W5RGP
Member
Should be programmed as MotoTRBO w/LCNs (use LCN finder if not known). You will need to identify and program all frequencies for the system.
Thought it would be. So I will hunt down the data and setup as a mototrbo system
Big thanks to all.
Big thanks to all.
Just to let all. I may have ovrtlooked/. But not see in the manual other than letting the user know it can be heard
- Status
Similar threads
BCD325P2/BCD996P2:
DMR Programming help
BCD396XT/BCD996XT:
Muting non-decoded audio on BCD996XT