Hello,
Could the function decode ICOM IDAS FDMA protocol be incorporated into the DSD +? It is a system that has been increasingly used for years and there is still nothing to be able to decode.
Thank you very much, greetings.
Please consider sending a raw audio sample to
dsdplusfastlane@gmail.com
1. Run DSDPlus on the signal in question that you want to decode (but DSDPlus will not decode)
It's best to do this when you know the system / channel is very active
2. In DSDPlus, press "r" to start a raw audio recording session
3. Record the raw audio for about 5 minutes. Then press "r" again to stop the raw audio recording session
You will find a file in your DSDPlus directory looking something like this:
DSDPlus-Raw-Input_2019-02-##@######.wav
Zip this file up (or not) and upload it to some file sharing place. Then send a link to that raw audio file to
dsdplusfastlane@gmail.com
A 5 minute raw audio sample is probably about 56 MB in size.
The key to getting any new protocol implemented (or even considered for implementation) is to make sure that the author has good raw audio to work with to begin with.