DSD+ noob

ve5wil · Oct 12, 2018

Running DSD+ with a PSR-800.

the local p25 system seems to decode
audio is passed through to computer speakers when there is voice

when there is no voice the data channel noise is audible. I gather i missed a setting somewhere?

moonbounce · Oct 12, 2018

ve5wil said:
Running DSD+ with a PSR-800.

the local p25 system seems to decode
audio is passed through to computer speakers when there is voice

when there is no voice the data channel noise is audible. I gather i missed a setting somewhere?

Where is the audio coming from you radio or the computer?

MB

ve5wil · Oct 12, 2018

im using the built in audio discriminator from the scanner headphone port. the only noise there is the data. the voice comes through the computer speaker.

moonbounce · Oct 12, 2018

So there is only two sources the data noise can come from, your radio in which you need to turn the sound off, and the computer speakers which you will need to go into the sound settings. In the sound settings and recording click on line in and adjust line in down until you hear nothing but the audio you want to hear.

MB

moonbounce · Oct 12, 2018

Here is a link to get you going, it is for DStar but it is the same setup for all.

https://ukradioscanning.com/viewtopic.php?t=312

ve5wil · Oct 12, 2018

thanks, I'll try that and see what happens

slicerwizard · Oct 12, 2018

ve5wil said:
when there is no voice the data channel noise is audible. I gather i missed a setting somewhere?

You probably have "Listen to this device" checked in the microphone properties.

DSD+ noob

ve5wil

Member

moonbounce

Member

ve5wil

Member

moonbounce

Member

moonbounce

Member

ve5wil

Member

slicerwizard

Member

Similar threads