Copy scanlists between 2 EzScan config files

Is there a way to copy a scanlist from one saved EzScan configuration to another, or one V-folder to another? I have a TRX-1 and a WS-1088 and have separate configurations for each, but I would like to copy some scanlists between each other.
Bob

pro106import said:

Is there a way to copy a scanlist from one saved EzScan configuration to another, or one V-folder to another? I have a TRX-1 and a WS-1088 and have separate configurations for each, but I would like to copy some scanlists between each other.
Bob

Click to expand...

Archive on one and restore from archive on the other.

NOTE: this will clone ALL the data, settings and power on screen text.

Thanks for that info WT. I was actually interested in just copying one scanlist from one to the other, not cloning the entire codeplug.

pro106import said:

Thanks for that info WT. I was actually interested in just copying one scanlist from one to the other, not cloning the entire codeplug.

Click to expand...

Try copying the correct v-scanner folder (cdat folder) to the micro sd card of the scanner you want to transfer that list to, make sure you archive before you try, so you have the archive to fall back on if needed, as I have not done this.

Other then that the only way to copy and paste (can't do it in ezscan) is to put your data in a spread sheet like excel or open office (free) then it can be used with any scanner by copy and pasting.