htdnet
Member
- Joined
- Oct 7, 2004
- Messages
- 16
I don't know if I have the correct freqs or in the right order to listen to the county radios. Right now I got the pager band running and can hear the lower paging freq only (494.43750). I had all the 800 freqs in to my Radioshack pro2067 on MO for the fauquier county system but I would get very random traffic like it was not trunking or I would hear too much of the data channel and it would stop scanning.
http://www.pro-92.com/pro2067first.htm
Above is a run down on the radio I have..
http://support.radioshack.com/support_electronics/doc61/61423.pdf
The Manual...
Freq/Bank
867.7000 00
867.8500 01
867.9250* 02
868.4500 03
868.5500* 04
868.7125* 05
868.9750 06
a post on www.thewatchdesk.com quotes these freqs
867.4375
867.7000
867.8500
867.9250
868.4500
868.5500
822.4375
822.7000
822.8500
822.9250
823.4500
823.5500
I understand we are on a MO II with SmartZone so I programmed it with MO and no subfleets as that is a MO I system feature. The freqs from the watch desk are not spitting out any data or voice communications however like I said I get the data feed from the seven previous freqs. Anyone got any suggestions? If you got the freqs in the same type of scanner and got the umbilical cable I would love to meet up and do a copy system to system chances are that no one does but its always a good thing to ask. Above all I am praying I don't have to go spend 400 bucks on a new scanner. -Thanks
http://www.pro-92.com/pro2067first.htm
Above is a run down on the radio I have..
http://support.radioshack.com/support_electronics/doc61/61423.pdf
The Manual...
Freq/Bank
867.7000 00
867.8500 01
867.9250* 02
868.4500 03
868.5500* 04
868.7125* 05
868.9750 06
a post on www.thewatchdesk.com quotes these freqs
867.4375
867.7000
867.8500
867.9250
868.4500
868.5500
822.4375
822.7000
822.8500
822.9250
823.4500
823.5500
I understand we are on a MO II with SmartZone so I programmed it with MO and no subfleets as that is a MO I system feature. The freqs from the watch desk are not spitting out any data or voice communications however like I said I get the data feed from the seven previous freqs. Anyone got any suggestions? If you got the freqs in the same type of scanner and got the umbilical cable I would love to meet up and do a copy system to system chances are that no one does but its always a good thing to ask. Above all I am praying I don't have to go spend 400 bucks on a new scanner. -Thanks