Hello all, I'm having an issue with my CPS I have an older prolific drivers installed so I'm not getting a code 10 error but when I load into CPS I hit for it to read my COM3 it start to not respond I tried waiting 15 minutes and it didn't work, any ideas
Hi,
I'm trying to programme some PD705's at work, but the previous person to have programmed them has left a read password on. I've tried the obvious 1234....etc and tried the "Reset Default Data" menu option but it displays an error message of "Read Default File Error"
Does anyone have any...
I've been trying to figure this out and obviously I'm stumped because I'm here asking for a little bit of insight....
I've got several radios all programed and working on my licensed frequencies using my licensed copy of the CPS. Just getting that out of the way. So before I added a repeater to...
I recently picked up an XPR4550 in UHF for DMR/Ham use. Once I received the radio I plugged it in to power and turned it on. After showing Channel 1 for a second it put out a tone and displayed "No Freq File" on the display and flashes the three LEDs in orange. So I plugged it into my computer...
Howdy all
I'm trying to install ASTRO 25 Portable CPS R20. on my Windows XP machine.
as i start up the setup I get an error say "The Installation Wizard has detected that the Motorola Application Launcher is running in the System Tray. Please close the Launcher before installing or...
Hello everybody!
I have a question as to whether or not multiple PL or DPL Codes on one conventional frequency can also be encrypted? I've built out a conventional codeplug and we have about 80 Personalities and only 20 frequencies to work with. So far, I've been able to load the keys, create...
Okay, I'm having a bit of an issue and I am beating my head against the wall here. I recently picked up an XTS3000 and programmed it to work like my old MT & HT. Everything works great with exception to there being a delay on the Rx side of things. When someone starts transmitting, I lose the...
Hello all,
I just purchased a few RMU2040's to replace our current business radios. I am attempting to program the frequencies through the CPS software but I do not have the ability to select or change the current channel frequencies. When I go to click the drop down arrow to adjust the...
Just to start off, i'm not looking for free versions or anything like that, nor am i looking to learn how to use them. I'm just curious as to the difference between them? Are they separate software or is Depot a more robust version of CPS? I am new to the moto world and slowly picking things up...
I had a friend ask me to program his HT1250-LS the other day.
I have programmed many of these radios in the past so I knew what I was doing.
I filled out 16 channels to mirror the local FD's radios and verified no errors in the error log before saving the codeplug and programming. When I...
Hi,
I'm trying to program an old CP200 (Model number H50KDC9AA2AN). When I read the radio into CPS v15.16, it lists the radio's frequency range as 146.0–174.0 MHz only, with no VHF2 or UHF frequency ranges listed. The software won't let me program any UHF frequencies into "channel...
Hi, I'm sure this has been asked before but I haven't had any luck finding an answer. Does anybody know where one would find the XTS3000 Astro 25 CPS? I've found an older version but when I try to "Read Device" from within the software I get a "Failed to Read Device" error. I researched that and...
I am trying to program my HT1550, I had bought a Serial PCIe card for my computer along with a RIB and the cables to go with it. I am having trouble being able to read or write to my radio I get the " Can not create unknown radio component" error, I had it programmed by a friend originally, but...
Hey y'all new to these forums and also new to Motorola CPS. I have a Motorola XTS 5000 (VHF) and the proper CPS (R20) to program it but I have been having some difficulty with the "scan" and "program scan list" features. And also how to select channels for scanning both in CPS and the radio...
I have three APX6500Li Radios hooked up to a NCS-C250 Radio Switch. Two of the three radios transmit fine through the switch. The third radio has a delay when transmitting through the switch. The radio stores the transmission than transmits it out when the PTT button is released. It doesn't...
I just programmed an XPR6550 UHF1 using the latest version of CPS (13). The software would not allow for the programming of 25 kHz analog. I've read that I can get an EID from Motorola to allow this, but that info was from 2012. Is this still the case? Also, I set scan groups and a scan...
Hello,
I was wondering what everyones thoughts were regarding programming FleetNet on an XTS 3000 when it comes to the coverage type option in the CPS.
When creating the Trunking System what is the best option for the coverage type: Disabled, Local AMSS, WAC AMSS, or SmartZone?
Thanks in Advance.
Does anyone have a 7/800 MHz cqodeplug for the APX6000. I have bought the CPS and the Cable. The cable is gonna take a few days to ship and I would like to just play around in the CPS before I get the cable. If you can help I would appreciate.
I recently moved from my desktop computer to a laptop computer to program my radios. I tried transferring my Motorola CPS by bringing all of the files over on a flash drive, because I cannot find my disc. The software works no problem on the desktop, and gives me the error code "Unknown Radio...