• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

memory

  1. NYR1122

    Uniden SDS200 Memory Loss

    Hello All, Needless to say I was very excited about getting this new scanner, however it didn't take long to find major problems with it. I first noticed after setting the time/date that after powering it off/on it would reset to Jan. 1 0:00 every time. Then I found that when pressing the...
  2. R

    Yaesu: FTM 100DR Memory Bank or lack there of

    I am looking to get an FTM 100dr- as my FT 7800 is in for repair but it dont look good for my old radio. But in researching that radio I see it has 500 memory channels- BUT NO BANK(S) like my old 7800- so I guess I would have to scan through all 500 or whatever if I don't have them bunched...
  3. I

    AOR 8200 pre-loaded channels

    Can someone please help me, I lost all my pre-loaded memory banks and I tried to recover from a backup but my external drive is dead. All my backups are gone. What I need is someones backup of AOR 8200 with pre-loaded memory info. Thank You
  4. N

    Alinco: Dr-600 mr / mw button fuctioni

    All function button work (they provide an acknowledgement tone) when pressed. Except the MR / MW button. Naturally I can't add into memory any freqs for VHF or UHF. Yes, CALL button beeps and I can enter freqs into both VHR and UHF call memorizes. Buttons are touch rather than push / click on...
  5. 5

    Yaesu: Programming FT-60 Was: New to HAM

    Looking for help with a yaesu FT-60. radio doesn't want to go along with instruction manuals. have googled and found alternate instructions but they are incomplete or do not account for radio not following the steps. trying to set, store and name a frequency to a memory channel. Any help??
  6. T

    UV-82 scanning

    Ok, I've programmed memory channels on a baofeng uv82 v2+ for a friend. The question is, can you "scan" the memory channels that are programmed? Not too familiar with this radio but it seems like a solid little handheld! Thanks for any help.
  7. gonzalu

    Can Icom or Yaesu do this?

    I am looking for a way to quickly access memory locations/frequencies on a VHF radio with airband coverage. I love the new touch screen capable radios from Yaesu and Icom but don't know if I could have this capability. Here is an example of what I am looking for. Thank you.
  8. gonzalu

    Is this possible? Quick Memory Access

    I was wondering if this would be a possibility either on the HomePatrol or via an remote control app such as Siren or RH-536HP or similar? Or if there is a good way for me to access a particular frequency or memory on deand instantly rather than typing it in or scrolling through channels...
  9. gonzalu

    Quick Access To Memories or Frequencies

    Hello all, Not sure where to post this. While I think this will probably be best served in the Uniden and Yaesu Forums, the rules do not allow for cross forum posting. So I will start here. I do quite a bit of Aviation monitoring for my spotting hobby. While monitoring aircraft and ATC, I try...
  10. T

    Naming banks on the Pro-404

    Is it possible to name the memory banks or channels to make them read FIRE or SHERIFF when selected instead of just the scrolling freqs?
  11. J

    Help reloading Pro 106 V-Scanner

    I bought a used Radio Shack Pro 106 from eBay, it is in great shape and it seems to function like new. The only problem is with the pre-programmed V-Scanner frequencies and its settings. When I try to load one from the V-Scan memory to the main memory it says there's an error and there are no...
  12. H

    Icom RX7 memory examples

    The reviews of the RX7 are covered elsewhere, so I thought I'd concentrate this thread on memory channel programming. The RX7 has a three-tiered layout of Categories, Groups, and Channels, along with Direct-Key toggling of these. However it is up to you to organize all this. There are many...
  13. car7858

    BCD396XT-Problem with uploaded channels

    Hello, I recently purchased a serial port to USB adapter for my Uniden scanner and it is working fine as far as connecting to the scanner & Freescan. However, when I load the P25 frequencise for my area into the scanner, the scanner shows the frequencies but dosen't receieve them. Also, I...
Top