• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

motorla

  1. N

    CDM 1250/1550 squelch adjustment

    Hi, I have a LB CDM1550 radio that has its squelch set too tight. The squelch breaks at ~-111dBm or .63uV. I need to readjust the radio so squelch opens at ~-120dBm or .21uV. Using a comms tester I read the radio using Moto's Tuner app (admittedly I have only used CPS in the past and have no...
  2. E

    xts 5000 trunked programming scan list

    yes when I edited my scan list to add zone 8 channel 1 to scan it will shows it in the scan list after I write the radio but wont work but all the other I put in work for some reason it the only zone 8 and channel 1 also when I am on that zone 8 and channel 1 I can not even put the radio on scan...
  3. K

    CDM 1250 problem

    So I Programmed a CDM 1250 VHF. This is the first one that I have done. The problem is when I key up I can Transmit but I cant receive anything. Anyone have any idea what the problem is? Please and thank you in advance.
  4. K

    Motorola XTL 2500 receiving issue

    Hello All, I have never posted on this site. I am a full time patrol deputy and a part time emergency equipment installer. I do not have a lot of knowledge when it comes to the digital systems or how they work. I know about enough to get me in trouble. So here is my problem… INFO: Installed...
  5. H

    Trouble Programming :(

    Hi all, I have an XPR7550 and I am trying to program it via cable, but having no luck. Cable says IMPRES Accessory when connected to the radio, and connects properly to Windows 7, but I cant seem to read or write to the radio. At a loss, any help appreciated!
  6. I

    APX 7000 Read/Write Issue

    It wasn't until recently that my APX7000 (700/800 - VHF) started acting up. Sometimes it will let me plug it in and read it, other times it immediately calls the device unrecognizable and blocks it. Now most of the times I get it to read I have to then spend close to 15-20 minutes trying to get...
  7. I

    Motorola GP380 TX Question:

    I finished programming a Motorola GP380 Full-Keypad yesterday and I noticed something on a test key-up, there is no Signal-Strength icon. I've delved through CPS and the help file but haven't found anything that mentions why it's not present. Anyone know how to get it to display? Does it require...
  8. S

    XTS 5000r password

    somehow all of a sudden when I turns on my cps a box comes up as needing a password, and will not let me into software until I give one and the pass word I would have used is incorrect, On the radio FPP it will not accept password that I have used to program radio in passed
  9. L

    Capacity Plus Enhanced GPS Expert

    Hello there. I am in need of a mototrbo capacity plus expert. I have a unique situation that I want to incorporate capacity plus but I am having trouble wrapping my head around the functionality. If there is an expert out there I would love to connect with you. Thanks Lindsay Wadsworth
  10. N

    XPR 6100 to Baofeng FB-F8+?

    At work we use the XPR 6100 and sometimes we are short radios. We primarily use channel 1 which I believe is 456.4375. I own a Baofeng FB-F8+ and I was attempting to connect to our radios, but I can only receive transmissions from our XPR's but the transmissions come in very quietly. I was...
  11. WQAJ741

    ASTRO trunking

    I have an astro saber that has conventional channels, and the company I am starting work for said I could use my own radio. The issue is that they are UHF trunked...now I heard Astro can do that, but can I have a zone where it is trunked and everything else is still conventional or is it one or...
  12. T

    HT1250 no sound

    This may be stupid but i recently had my 1250 programmed for use at work, all of the channels in the zones work except for one of them. 153.62000 is the frequency for this channel 431 DPL, i tried to use it this morning at work and was able to transmit and my dispatch, and they could hear me...
  13. D

    Motorola Raduis CP200

    Does anyone have the frequencies for channels 1 and 2 for the vhf CP200?
Top