OK so I'm thinking about putting up a 220 vertical and getting a radio to go along with it.
For reasons I'm not going to get into, I'd definitely *prefer* something in the 3-4' range in height, but I can see doing 5-6'. 8 foot? Probably not. 10 or more? Nope.
Yes, I understand that limits my choices, and that anything I pick won't work as well as something that falls outside my restriction. But at this point "something" is better than "nothing", right?
I would also prefer an N connector, although UHF is OK.
So here are a couple potential options. Looking for anyone who has experience with any of them, and for other recommendations.
Thanks in advance!
For reasons I'm not going to get into, I'd definitely *prefer* something in the 3-4' range in height, but I can see doing 5-6'. 8 foot? Probably not. 10 or more? Nope.
Yes, I understand that limits my choices, and that anything I pick won't work as well as something that falls outside my restriction. But at this point "something" is better than "nothing", right?
I would also prefer an N connector, although UHF is OK.
So here are a couple potential options. Looking for anyone who has experience with any of them, and for other recommendations.
220 (1.25 Meter) Vertical Outdoor Base Antenna
Specs Gain: 3.5 dBi SWR: 1.5:1 or Less Pattern: Omni-directional Wavelength: 1/2 Elements: 1 Tuned: 220-225 MHz Band: VHF 220 Connector: N Female Cable: RG8X Cable Length: 12 Inches Height: 42" Width: 1 1/4" Weight: 1.5 lb Wind Area: 0.25 Sq Feet Features Ready Made: There's no...
dpdproductions.com
FG2200 : 220-225 MHz, Unity/ 2.15 dBi Outdoor Fiberglass Omni base Station Antenna with N-Female Connector
The FG2200 from Laird (formerly Antenex) is a heavy duty, omni-directional fiberglass base station antenna operating at 220-225 MHz, providing Unity/ 2.15 dBi of linear gain.*Note: This antenna DOES NOT ship with mounting hardware. We recommend the ROSA-HDM1 mounting bracket*
www.arcantenna.com
Thanks in advance!