• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

4021 zone operation

Status
Not open for further replies.

redneckcellphone

Member
Premium Subscriber
Joined
Apr 25, 2009
Messages
417
Location
southern comifornia
first zone i have set for work and the second one for gmrs. but as of right now until i figure out more on the programming i put both work and gmrs also on the first zone. what would i need to program to make it switchable to the different zones?
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,617
Location
Hiding in a coffee shop.
It's been a while since I've done this, and even then it was on 121 and a 221…
You need to program channels into the different zones.
You also need to program a button for "Zone select".

Pushing the zone select button and then the up or down arrow will step through the zones.
 
Status
Not open for further replies.
Top