• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

99 Sable wagon firewall

Status
Not open for further replies.

ddoppke

Member
Joined
Aug 13, 2004
Messages
45
Does anyone know where a plug through the firewall of a 99 Sable wagon might be to use for power leads? I do not want to drill a hole if I don't have to. In my previous vehicles I was able to find a plug that I could remove to access the engine compartment fr the power leads, but not in this vehicle. Thanks for any ideas.
Dennis - W8ITC
 

money911

Member
Joined
Feb 18, 2008
Messages
24
Location
Delaware/Philadelphia
im not sure where the AUX plug is but if you cannot find it and dont want to drill a hole, than locate where the wires from the ecu or power leads are running throu the firewall. there is usually a rubber style boot that passes them throu the wall you can cut a small slice or take a metal coat hanger and put it though there with the wire attached and wala its through. Be safe and make sure when you punch through your not going to cut anything.

best of luck
 
Status
Not open for further replies.
Top