grayam
Member
So I opened up my BCT15 scanner today and checked the firmware it's v 1.03.04, so I need to update it. I checked the link I found on this discussion board and doenloaded the installer and the firmware update. Useing a RS USB to Comm cable w/driver I attempted to load the firmware. I seemed to have it on my computer ok and the installer works. But an error message with several options comes up.with several possabilities.
1.Bad connection. The RS cable had just communicated fine with my GPS So I cheked all of the com port numbers and speed to match, computer and radio. I started BCtool and it connects fine and is logging and controlling BCT15.
2. No power to BCT15, I;m looking at a blank orange screen with backlight on.
3. Did not press L/O and #6 while turning on, see #3 above.
4. Removed batteries I do not know about batteries for the BCT15
5. Firmware version is corrupted download another.
\Anyone know another source for the firmware?
Any other suggestions?
Larry Grayam N7XIV
1.Bad connection. The RS cable had just communicated fine with my GPS So I cheked all of the com port numbers and speed to match, computer and radio. I started BCtool and it connects fine and is logging and controlling BCT15.
2. No power to BCT15, I;m looking at a blank orange screen with backlight on.
3. Did not press L/O and #6 while turning on, see #3 above.
4. Removed batteries I do not know about batteries for the BCT15
5. Firmware version is corrupted download another.
\Anyone know another source for the firmware?
Any other suggestions?
Larry Grayam N7XIV