MStep
Member
AOR has asked me to post the following information regarding a potential issue in Firmware Version 1607B. The issue was raised by one of the forum participants, and AOR would like to know if and how it is affecting other users.
The user reported as follows:
"Scanning digital channels. It just hangs on a P25 signal, NAC 140. No voice, it just sits there and does not keep scanning."
In order to help identify, track, and correct this issue, AOR would like to know the following information from others who may have experienced the problem:
1. Did the receiver hang up only once or all the time?
2. What is the FREE and DELAY settings for SCAN GROUP? (He may provide us SYSTEM.CSV date for our analysis.)
3. While in No Voice, is it possible to switch to VFO mode? Can the receiver turn power off?
4. Does the problem happen on the same channel?
5. Does the receiver hang up in any modes, such as SCAN mode, VFO mode, or Memory channel mode?
6. If the receiver is set other than NAC 140, does it not hang up?
AOR is continuously working to improve the performance of the AR-DV1 and all of its other products. Persons with information that may help provide input regarding this issue can email their responses to:
info@aorusa.com
The information will be forwarded to AOR's engineers for resolution.
(Note- Not sure if AOR also directly contacted the original person who initiated the issue. If you were not contacted directly by AOR, please respond to the questions above with an email to the address provided.)
The user reported as follows:
"Scanning digital channels. It just hangs on a P25 signal, NAC 140. No voice, it just sits there and does not keep scanning."
In order to help identify, track, and correct this issue, AOR would like to know the following information from others who may have experienced the problem:
1. Did the receiver hang up only once or all the time?
2. What is the FREE and DELAY settings for SCAN GROUP? (He may provide us SYSTEM.CSV date for our analysis.)
3. While in No Voice, is it possible to switch to VFO mode? Can the receiver turn power off?
4. Does the problem happen on the same channel?
5. Does the receiver hang up in any modes, such as SCAN mode, VFO mode, or Memory channel mode?
6. If the receiver is set other than NAC 140, does it not hang up?
AOR is continuously working to improve the performance of the AR-DV1 and all of its other products. Persons with information that may help provide input regarding this issue can email their responses to:
info@aorusa.com
The information will be forwarded to AOR's engineers for resolution.
(Note- Not sure if AOR also directly contacted the original person who initiated the issue. If you were not contacted directly by AOR, please respond to the questions above with an email to the address provided.)
Last edited: