• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

APX6000 question

Status
Not open for further replies.

fire1429

Member
Premium Subscriber
Joined
May 6, 2010
Messages
106
Location
texas
I have a XE RSM mic on my APX6000 and when I turn the radio on with the mic connected it sends the radio to the scan selection menu. Without the mic connected it does not do it, what do yall think I need to do to fix the problem.
 

GTR8000

NY/NJ Database Guy
Database Admin
Joined
Oct 4, 2007
Messages
16,033
Location
BEE00
Try a different mic. Sounds like one of the buttons is mapped to the Scan function and it's stuck. Maybe try cleaning the mic if it's all gummed up.
 

fire1429

Member
Premium Subscriber
Joined
May 6, 2010
Messages
106
Location
texas
Try a different mic. Sounds like one of the buttons is mapped to the Scan function and it's stuck. Maybe try cleaning the mic if it's all gummed up.
Thank you I opened it up and cleaned it but it did not fix the problem. How would one go about getting the button unmapped for scan?
 
Status
Not open for further replies.
Top