• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

APX7500 monitor stays on/auto off alert

P

pvnh

Newbie
Joined
Apr 21, 2011
Messages
50
Location
CT
Hello all,

I have a VHF/UHF APX7500 and I can not get the monitor function to turn off. My suspicion is that it’s a setting in the CPS as the monitor speaker icon remains on the radio screen even when it says monitor off. I did program PL/DPL tones in CPS. From my testing it appears that the radio is transmitting it's programmed PL/DPL tone.

Additionally when the truck is turned off the radio long tone beeps for approximately 2 minutes before shutting off even with the settings below.
 

Attachments

  • APX7500 pictures.pdf
    276.3 KB · Views: 14
Solution
nhfdcadet
pvnh said:
Hello all,

I have a VHF/UHF APX7500 and I can not get the monitor function to turn off. My suspicion is that it’s a setting in the CPS as the monitor speaker icon remains on the radio screen even when it says monitor off. I did program PL/DPL tones in CPS. From my testing it appears that the radio is transmitting it's programmed PL/DPL tone.

Additionally when the truck is turned off the radio long tone beeps for approximately 2 minutes before shutting off even with the settings below.
Click to expand...

conventional wide > HUB defeats PL unchecked
Radio wide > features >ignition switch soft power off
Radio wide > features >ignition auto power off disabled
Sort by date Sort by votes
hakwye8518

hakwye8518

Member
Premium Subscriber
Joined
Sep 1, 2010
Messages
227
Location
Town of Islip, NY
Does the channel in question have an receive pl/dpl or is it setup for csq? It will display the speaker icon if the channel is set for receive csq. Under radio ergonomics wide default control head hub state try on hook. I don't know why the radio would be giving a long tone before powering off. Are you using ignition sense and is ignition switch set to soft power off. What about ignition auto power off, is that disabled.
 
Upvote 0 Downvote
nhfdcadet

nhfdcadet

Member
Premium Subscriber
Joined
Jan 17, 2008
Messages
713
Location
New Hartford, Ct
pvnh said:
Hello all,

I have a VHF/UHF APX7500 and I can not get the monitor function to turn off. My suspicion is that it’s a setting in the CPS as the monitor speaker icon remains on the radio screen even when it says monitor off. I did program PL/DPL tones in CPS. From my testing it appears that the radio is transmitting it's programmed PL/DPL tone.

Additionally when the truck is turned off the radio long tone beeps for approximately 2 minutes before shutting off even with the settings below.
Click to expand...

conventional wide > HUB defeats PL unchecked
Radio wide > features >ignition switch soft power off
Radio wide > features >ignition auto power off disabled
 
Upvote 2 Downvote
Solution
You must log in or register to reply here.

Similar threads

TJX400
Command Center/Dispatch Console Build
2 3
Replies
52
Views
13K
pb_lonny
pb_lonny
Sheepdog777
Traveling Ham Mobile Radio - U.S. Repeaters Common Frequencies (2M & 70Cm Bands Only)
2 3
Replies
42
Views
9K
KJ7YMR
K
J
  • Locked
What is HP-1 version 2, and do I have it?
Replies
5
Views
2K
fxdscon
fxdscon
F
  • Locked
Motorola ht1000 VHF quick call II tone code help needed
Replies
15
Views
3K
Rred
R
F
  • Locked
TK-2312 Pager Tone Code programming help.
Replies
13
Views
5K
firemedic78
F
Top