LModeBAT/Backlight Settings-Mode (Batt) Controls how the backlight operates on battery power. Default is Key/Key Press.
LModeEXT/Backlight Settings-Mode (Pwr) Controls how the backlight operates on external power. Default is On.
Note: see also Backlight Mode/Light for object backlight settings.
On - backlight is always on.
Stlth - backlight is always off.
Norml - backlight turns on when the power key is pressed for the amount of time set in LiteTime.
Key/Key Press - backlight turns on when any key is pressed (and used) for the amount of time set in LiteTime.
Ignor - works like 'Key' but the key's normal function is ignored for the first press. Pressing any key again (when the light is on) will activate that key's function.
Scanner Press or to select On, Stlth, Norml, Key, or Ignor.
Software General Settings > Backlight Settings > Mode (Batt and Pwr)- On, Stealth, Normal, Key Press, or Ignore First Key Press.
LiteArea/Backlight Settings-Area Controls what is lighted. Default is Both.
Both - lights the display and keypad.
LCD - lights the display only.
Keybd - lights the keypad only.
Scanner Press or to select Both, LCD, or Keybd.
Software General Settings > Backlight Settings > Area- Both, LCD, or Keys.
Contents
LiteTime/Timeout Controls the amount of time the LiteArea stays on when LMode is set to Key/Key Press, Ignor, or Norml. Default is 5.
Scanner Press SEL or to edit. Enter the number of seconds, 1 - 99.
Press or to select the first digit, then to move the cursor and select the second digit.
Press SEL to save and exit.
Software General Settings > Backlight Settings > Timeout- 1-99.
LiteLevel/Backlight Settings-Level Controls the brightness of the backlight and (if enabled) the Alert LED. Default is 4.
Scanner Press or to select Low, 2-10, or High.
Software General Settings > Backlight Settings > Level- Low, 2-10, or High.
Easier to Read Pro-668/PSR800 Digital Scanner and EZ-Scan/iScan Software Manual