BC125AT help

Status
Not open for further replies.

tcwright973

Member
Joined
Nov 16, 2013
Messages
2
Reaction score
0
Location
Pittsburgh, PA
A few days ago I purchased a BC125AT. I have programmed railroad frequencies into Bands 1 & 2, and was able to tag some channels. Everything has been fine, but somehow this evening, I really don't know what I may have done, it is no longer scanning Band 1. When I manually go to the channels on band 1, everything is there and none of the channels are locked out. Bands 1 & 5 do not display on the bottom of the screen. Can someone help me recover these frequencies. Thanks
 

k1agh

Member
Joined
May 8, 2012
Messages
419
Reaction score
1
Location
Maine
click on the number 1 and 5 while its scanning and see if that helps.
 

tcwright973

Member
Joined
Nov 16, 2013
Messages
2
Reaction score
0
Location
Pittsburgh, PA
Tom,
Your suggestion solved my problem and your quick response is greatly appreciated. I am really pleased with this scanner, but the manual leaves a lot to be desired for a novice. This experience has also taught me to lock the keypad so I don't do dumb things. Thanks again. Tom
 
Status
Not open for further replies.
Top