• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

BC125AT no reception

Status
Not open for further replies.
Joined
Sep 12, 2016
Messages
2
#1
I have a BC125AT that has up until this week worked fine. Now I am unable to receive on any of my programmed frequencies.

The scanner is scanning and all of my frequencies are being displayed. The volume is all the way up and the squelch appears to be set properly.
 

UPMan

Uniden Representative
Premium Subscriber
Joined
Apr 19, 2004
Messages
13,287
Location
Arlington, TX
#3
And, if you manually tune to a known strong constant transmission (like one of the NOAA WX frequencies) do you hear anything?
 
Status
Not open for further replies.
Top