BCD996 programming

Status
Not open for further replies.

iamhere300

Member
Joined
Jun 27, 2004
Messages
1,346
Location
Chappell Hill TX
I am using BCTool to program my scanner, with CSV files from RR.

On the Arkansas Awin system, I appear to be successful in programming, but the
scanner decodes nothing.

While looking at it, it shows the system to be 800 mhz trunking, but I do not find
a tab for 800 Mhz trunking P25. Should I need to do that? as this system is P25,
should I be using something else?
 

Airdorn

Member
Joined
Mar 9, 2008
Messages
481
Location
Cordova, TN
When setting up the new system, choose Motorola type 2/P25.. then when setting up the new site for that system, choose P25.

See if that works.
 

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
25,362
Location
Bowie, Md.
In addition to the comment below, you don't want to be importing the csv files from RR. You are a premium subscriber; so you should be able to log in with your login/password (same as the one you use here), and connect directly to the database, then download what you need.

73 Mike
 

iamhere300

Member
Joined
Jun 27, 2004
Messages
1,346
Location
Chappell Hill TX
Thanks... I had NOT been able to do much with the CSV's, I was downloading directly.

I am headed through KY to Nashville tonite, I will try some of those and see what happens.
 
Status
Not open for further replies.
Top