Benton County Public Safety?

Status
Not open for further replies.

scanthewaves

Member
Joined
Jul 18, 2003
Messages
246
Location
Texas
I just moved to Corvallis and have been monitoring analog 155.4900 Benton Law last day or so, not really sure what I'm listening to, is this dispatch for CPD and LCSO? Is this the simulcast for the 700 MHz trunk? I'm perplexed if there are only 3 channels for Benton simulcast 700 and 2 are control how can it trunk with just one channel? I can't listen to the 700 MHz since my pro 96 inability to cover that band I understand Win 96 will open that up but not very effectively and my pro 164 can program 700 but its not apco 25 this is very frustrating is there a solution or will I only get limited coverage on the old analog channels? Does the same apply with Linn County and Albany PD as well? By the way if I'm not mistaken these 700 MHZ channels were originally used for Over the air TV and since the move to digital they have been auctioned off to the highest bidder, it's all about the Benjamins! Like I posted in city-data about not getting Me TV here in Corvalis, I miss the analog days!
Thanks
 
Last edited:

TBT0689

Member
Premium Subscriber
Joined
Oct 31, 2007
Messages
12
Location
Salem, OR
Welcome to the area!

For starters, take a look at the Benton County wiki - hopefully the unit numbers and other info listed there will help you identify what you're hearing at any given time.
http://wiki.radioreference.com/index.php/Benton_County_(OR)

155.490 is the primary dispatch frequency for the Benton County Sheriff's Office and Philomath Police Department. The Corvallis Police Department uses this frequency about half of the time these days. The other half of the time (when dispatch staffing allows), they switch to the 700 MHz trunked system, leaving BCSO and PPD on VHF. To my knowledge, neither BCSO or PPD use the 700 MHz system currently. Note that all three agencies are dispatched by the Corvallis Regional 911 Center. 155.745 and the 700 MHz system are not connected in any way for the time being. I can't provide much more informaitno about the 700 MHz at this point as I don't have the equipment to monitor it either.

In case you haven't already explored them, there are several other good frequencies to monitor for LE activity in Benton County - State Police, OSU Public Safety, etc. See the database for more info.

Hope this helps!
 

dkf435

Member
Joined
Apr 15, 2006
Messages
729
Location
Sweet Home/Foster OR
Way back when everybody started out on TRI County which was 155.010 still used for mutual aid.
Main Police freqs
155.490 Benton county unit IDs 400 Sheriff 800 Corvallis PD 1100 Philomath 900 series units used to be OSU campus?
154.665 Oregon State Police 23 units think 24 is campus they used to run 155.745 for campus
154.710 Linn County Sheriff 700, 600, and some 500??
153.815 Albany PD VHF now on 700 trunked system 100 series units.
154.815 Sweet Home 200 series units
460.025 Lebanon 300 series

Start saving for a 700 trunked radio as it looks like it will be coming if you like it or not, they are telling all the cops that this will solve all their coverage problems now (just like snake oil salesmen do)

David Kb7uns
 

OregonScanner

Member
Premium Subscriber
Joined
Oct 30, 2009
Messages
745
Benton County:
154.3400 [167.9 PL] Benton Co Fire Dispatch
158.8200 [167.9 PL] Benton Co Fire Ops (Corvallis FD only)
155.4900 [DCS 143] BCSO-Vineyard
155.4900 [DCS 205] BCSO-Logsden
155.4900 [151.4 PL] BCSO-Wren (Philomath)
155.4900 [DCS 174] BCSO-Mary's Peak
155.4900 [DCS 223] BCSO-Prairie Peak
155.1975 [DCS 134] Corvallis Police Alternate Dispatch (now replaced by 700 MHz)
156.2400 Corvallis Police Tactical / Public Works (tone may be 167.9 PL)
154.6650 [156.7 PL] OSP Albany (West Linn County / Benton County)
155.7450 [127.3 PL] OSP Corvallis (OSU Campus Only)
168.0250 [136.5 PL] Siuslaw NF / Willamette NF Law Dispatch
154.0850 [156.7 PL] Philomath Public Works
45.56000 [156.7 PL] Benton Co Roads
151.0250 [100.0 PL] ODOT District 4 Dispatch
151.1675 [167.9 PL] ODF West Oregon
163.3750 [103.5 PL] Siuslaw NF Central
171.6750 [114.8 PL] BLM Salem-Mary's Peak
171.6750 [CSQ] BLM Salem (All repeaters except Mary's Peak)

Linn County:
154.3100 [167.9 PL] Linn Co Fire 1 - Dispatch
154.1300 [167.9 PL] Linn Co Fire 2 - Working - Albany FD / West of I-5
153.9950 [167.9 PL] Linn Co Fire 3 - Working - East of I-5
155.5650 [167.9 PL] Linn Co Fire 4 - Scott Mtn Backup (this freq is NOT Adair Village PD that is listed in the database)
154.7100 [156.7 PL] LCSO-Knox Butte
154.7100 [151.4 PL] LCSO-Scott Mtn
154.7100 [110.9 PL] LCSO-Cougar Rock
154.7100 [100.0 PL] LCSO-Halls Ridge
155.7825 [DCS 306] Linn Co Jail
460.0250 [167.9 PL] Lebanon Police
154.8150 [141.3 PL] Sweet Home Police analog
154.8150 [141 NAC] Sweet Home Police digital
154.6650 [156.7 PL] OSP Albany (West Linn County / Benton County)
154.8600 [156.7 PL] OSP Mill City (East Linn Co)
153.8750 [CSQ] Albany Public Works
153.9350 [CSQ] Lebanon Public Works
156.0000 [141.3 PL] Sweet Home Public Works
151.0250 [100.0 PL] ODOT District 4 Dispatch
151.2425 [167.9 PL] ODF Sweet Home
164.9125 [103.5 PL] Willamette NF North
164.9375 [103.5 PL] Willamette NF Central
164.8250 [103.5 PL] Willamette NF North
166.5625 [103.5 PL] Willamette NF Project 4
164.9625 [103.5 PL] Willamette NF Project 5
170.5000 [103.5 PL] Willamette NF Project 6
171.6750 [114.8 PL] BLM Salem-Mary's Peak
171.6750 [CSQ] BLM Salem (All repeaters except Mary's Peak)
172.8125 [162.2 PL] BLM Eugene (south Linn Co--north is BLM Salem)

Hope it helps.
 

scanthewaves

Member
Joined
Jul 18, 2003
Messages
246
Location
Texas
Very helpful, yes I was listening to OSU Patrol last night, pretty boring, well I think I will work on getting a 700mhz digital trunking scanner just the same, since it would appear that's the direction the whole country is going.
Thanks


Welcome to the area!

For starters, take a look at the Benton County wiki - hopefully the unit numbers and other info listed there will help you identify what you're hearing at any given time.
http://wiki.radioreference.com/index.php/Benton_County_(OR)

155.490 is the primary dispatch frequency for the Benton County Sheriff's Office and Philomath Police Department. The Corvallis Police Department uses this frequency about half of the time these days. The other half of the time (when dispatch staffing allows), they switch to the 700 MHz trunked system, leaving BCSO and PPD on VHF. To my knowledge, neither BCSO or PPD use the 700 MHz system currently. Note that all three agencies are dispatched by the Corvallis Regional 911 Center. 155.745 and the 700 MHz system are not connected in any way for the time being. I can't provide much more informaitno about the 700 MHz at this point as I don't have the equipment to monitor it either.

In case you haven't already explored them, there are several other good frequencies to monitor for LE activity in Benton County - State Police, OSU Public Safety, etc. See the database for more info.

Hope this helps!
 

scanthewaves

Member
Joined
Jul 18, 2003
Messages
246
Location
Texas
Yep in fact in the 90's when we lived here we would monitor those channels with a early R.S. Pro scanner, I agree just like snake oil salesman, good for whatever ails you, I.E. poor coverage, what a scam!


Way back when everybody started out on TRI County which was 155.010 still used for mutual aid.
Main Police freqs
155.490 Benton county unit IDs 400 Sheriff 800 Corvallis PD 1100 Philomath 900 series units used to be OSU campus?
154.665 Oregon State Police 23 units think 24 is campus they used to run 155.745 for campus
154.710 Linn County Sheriff 700, 600, and some 500??
153.815 Albany PD VHF now on 700 trunked system 100 series units.
154.815 Sweet Home 200 series units
460.025 Lebanon 300 series

Start saving for a 700 trunked radio as it looks like it will be coming if you like it or not, they are telling all the cops that this will solve all their coverage problems now (just like snake oil salesmen do)

David Kb7uns
 

scanthewaves

Member
Joined
Jul 18, 2003
Messages
246
Location
Texas
I have an old Bct 10 Bear Tracker I just got on ebay or as I like to call ecrap, anyhow it gets some of the freqs, but unless I match them up on the Pro 64 I have to listen for unit IDs etc to know what I"m listening to. works great for HP and State Police monitoring as long you don't go to FL, lol
 

scanthewaves

Member
Joined
Jul 18, 2003
Messages
246
Location
Texas
After using extending frequency on win96 I inputed the 700 mhz frequencies for Benton in my pro 96, but all I hear is the control channel, any ideas why? I know the pro 96 won't trunk 700 mhz like the pro 18, but I just wanted to see if it could be heard.
Thanks
 
Last edited:

OregonScanner

Member
Premium Subscriber
Joined
Oct 30, 2009
Messages
745
The database only has 3 of the freqs. Here are all 8 of them:

770.78125
771.45625
771.80625
772.28125
772.88125
773.45625
774.38125
774.70625
 

scanthewaves

Member
Joined
Jul 18, 2003
Messages
246
Location
Texas
Well that explains it, I just entered the rest of the freqs and I'm getting some garble and it shows DG instead of MO, I'm guessing that's for Digital? Anyhow, I think I'm going to get get either a BCD396t or xt, I hope it will be more intelligible the on the pro 96.
Thanks for the additional freqs.
 
Status
Not open for further replies.
Top