• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

chatter

Status
Not open for further replies.

green737

Member
Joined
Mar 7, 2008
Messages
10
I was wondering when dispatch pages out the ambulance I can hear dispatch talk to them but I can not hear the ambulance respond back or talk to the ER when they give there report some times what would I have program or were do I find the freq for them I have firegrounds and county county Ems
 

nslt204

Member
Joined
Dec 18, 2003
Messages
88
Location
Port Washington, WI
Are they using simplex? if so it is a function of how close you are to the units talking not the frqs.
What community or county are you referring to?

green737 said:
I was wondering when dispatch pages out the ambulance I can hear dispatch talk to them but I can not hear the ambulance respond back or talk to the ER when they give there report some times what would I have program or were do I find the freq for them I have firegrounds and county county Ems
 

green737

Member
Joined
Mar 7, 2008
Messages
10
hearing

I think it might be that simplx it is green lake county and ripon ems and fire because for ripon this morning when they were paged I heard dispatch the first time and no EMS then I heard Ems twice so it might be simplx but I dont dont about berlin and the others
 

1268

Member
Premium Subscriber
Joined
Jun 11, 2005
Messages
416
green737 said:
I think it might be that simplx it is green lake county and ripon ems and fire because for ripon this morning when they were paged I heard dispatch the first time and no EMS then I heard Ems twice so it might be simplx but I dont dont about berlin and the others
For Green Lake they page out on low band, they go in route on 154.400 at least that's how it has been in the past. 400 is a repeater so you should be hearing everything ? I see Green lake county EMS is using 155.220 do you have that programed in. Check the data base for both Green lake and Fond Du Lac county as Ripon ems talks to the hospital using different frequencies and PL tones.
 

SCPD

Member
Joined
Feb 24, 2001
Messages
65,126
Location
Virginia
Ripon uses a repeater as well, 155.955. Fond du Lac county fire dispatch is simplex. They page and dispatch of the same frequency
When you say you can't hear the ambulance talk to the ER, what hospital are you talking about?
If they are using 155.34 and/or 155.4 these frequencies are simplex.
 

green737

Member
Joined
Mar 7, 2008
Messages
10
I can Hear

the main ER's I try to listen to are RMC and BMH those are the ones I work with and I Have been picking both up now and then It seems to be that if the weather is a certain condition I can hear better I do have a lot of those freq programed all ready is there a book out there like scanners for dummies I am just new at this my level of knowledge is how to turn it on and program it Thanks
 
Status
Not open for further replies.
Top