Cleveland County P25 with RS Pro-2096

[skylerm]

Up until maybe 6 months ago my pro-2096 picked up the Cleveland County/Shelby P25 system great, however, it stopped working (only receiving between 0-14 percent) and I thought there was something wrong with my scanner. I tried the Viper system and it sounds great still so I think the scanner is ok.

I believe there is a problem with my Multi-Table. I Used Pro96Com and was able to pull up the Frequency Identifier Tables shown below.
------------------------------------------------------------------------------------------------------
ID, S, Base, Spacing, TXOffset, Source, Bandwidth
------------------------------------------------------------------------------------------------------
00, 1, 851.00625, 0.00625, -45.0, C, 0.01250
01, 1, 762.00625, 0.00625, 30.0, C, 0.01250
-------------------------------------------------------------------------------------------------------
I couldn't get anything to work when I entered what I thought was right in the multi table section on win-96.

I know most scanners will automatically pull the tables from the CC but the pro-2096's will not so I need the correct table.

If someone has a pro-2096 with this site programmed could you send me your .p96 file or if anyone could help me with the tables that would be great.

 

[retiredmich]

skylerm, I don't do soft ware but I did look at the info on Cleveland / Shelby & found 3 county's with
Shelby listed. Hope this helps, " Cleveland / Shelby = 853.9125cc , 852.7500a & TG ID # 12004 = Sheriff, Kings mountain So = 853.7500cc , 853.1375a , Boiling Springs = 851.9750cc , 853.6875a"

 

[skylerm]

I will check those frequencies out but I should already be getting all of that from the p25 system.. those are all cities or towns in cleveland county... I still believe it's a problem with the tables... thanks though

 

[skylerm]

The frequencies retiredmich posted were from the VIPER system I believe. I am looking to get this system working.

Cleveland County Public Safety System Shelby, North Carolina


Thanks for your help